Carrier HH19ZA125 L125-35F LIMIT SWITCH

L125-35F LIMIT SWITCH

A limit switch is an electrically operated switch, which senses counterweight or load movement and, in response, actuates a mechanism to perform a task. The Carrier HH19ZA125 L125-35F LIMIT SWITCH is a normally closed momentary push to trip 125V low voltage limit switch with an attached 50ft of 2 conductor shielded cable.

A limit switch is an electrical switch that opens and closes at a set point. Limit switches are often used as part of an automatic control system, including those used in manufacturing and machine tool applications, as well as conveyor systems. When the machine reaches the pre-set position, the limit switch activates to prevent further motion. The L125 has a rectangular plastic housed switch with four lead wires and a common lead. This model features composite metal terminals.

This limit switch with a maximum flying weight of 12,500 lb at 125 mph is an excellent replacement to ensure safe operation in your application.

The Carrier HH19ZA125 Limit Switch has a seat, spacer, coil, and operating nut all made of stainless steel to ensure there is no corrosion or deterioration. This switch is designed for a 12.5 amps with an on-off rating of 35A @ 2950 VAC. It's tested in both dry heat and oil for three hours at 176 degree F. The steel structure makes the spring three times stronger than in cast devices, making the switch last longer. Designed for food and pharmaceutical industry applications, this switch is also used in heavy manufacturing industries. Please note that schematic wiring diagram is not included with this

The rugged Carrier HH19ZA limit switch was designed for use in harsh conditions. It's ideal for high/low temperature limits on gas, air, or liquid heaters. Ideal for industrial and commercial applications.

The Carrier HH19ZA125 limit switch provides a signal that the motor has reached its maximum speed. It is used to sense current flow and vibration in a cyclic motion. The HH19ZA125 is a normally closed limit switch...

These two wire, push-button devices are used for limit control applications. The push-button mechanism establishes limit switches for machine or industrial controls. They are used in a variety of applications to stop or start machines and to warn the operator of a potential hazard.