Carrier HT32TC707 Crankcase Heater

Crankcase Heater

The Carrier High Temperature Crankcase Heater provides warmth and a comfortable, dry environment in your truck bed, in minutes. Includes fittings, 270 watt heater, fan switch and aluminum heat shield.

The Carrier HT32TC707 crankcase heater has the ability to provide year round engine protection from damaging temperature variations, or hot starts when it's cold out. At it's maximum setting, the HT32TC707 crankcase heater puts out up to 17,000 BTU's of heat and will keep your engine warm in temperatures as low as -25°F/-32°C.

Keep your oil temp up to 200F during those cold early morning starts with the Carrier HT32TC707 crankcase heater. This crankcase heater connects directly to the blower housing on the engine to draw air through its 6-inch, 20-lb. ceramic fiber core, which in turn removes heat from the crankcase so you are ready to ride as soon as possible. Left and right plugs allow you to connect two at a time, while the thermostat gauge monitors surface temperature of the oil. Easy-to-follow instructions make it a snap to install.

The Carrier HT32TC707 Refrigeration Crankcase Heater is designed to be used in conjunction with reciprocating and rotary compressors. This heater vaporizes a small amount of refrigerant to prevent the oil from solidifying when the system is filled and to prevent premature compressor failure.

Carrier's HT32TC707 crankcase heater is an oil filled, finned heater that replaces an engine oil filter and heats the engine coolant prior to entering the block for easier starting and enhanced performance. This unit has a 7'' x 10 1/2'' capacity. The heater is rated for continuous duty at 30 amps (240v) with a Max rating of 32 amps (240v).

The Carrier HT32TC707 crankcase heater is a must-have addition to your oil burners. The heater works with most models including furnace units, water heaters, furnaces, boilers and more. It features a mounting flange with tapped holes for easy installation and a 20-inch flex line.

The Carrier HT32TC707 crankcase heater is a self-contained heater engineered for use in an auxiliary mode on diesel engines. The heater produces more than 50,000 btu per hour with its 1500 watt rated thermal output. The heater is complete with a 7 amp fuse and 8 padded feet for a safe and secure installation. It features a stainless steel construction for long-lasting durability.