CDI ELECTRONICS667-1331251 TIMER BASE BRP# 581251

TIMER BASE BRP# 581251

The new CDI Electronics TIMER BASE BRP# 581251 is a replacement base for any time switch. This unit features a bezel that has an AC input, an instant off/on toggle switch and high visibility red LED, wire connections in the rear, extra long mounting tabs and mounting slot.

The TIMER BASE BRP# 581251 is a timer base to fit Briggs & Stratton #'s: C9, C11, C13, C15, BB1, BC8, V4600, V6100 series engines. This timer base is a direct replacement for the part numbers listed above.

The CDI Electronics TIMER BASE BRP# 581251 controls the on/off and timed operation of your water heater, heat pump, outside light, fan, irrigation system, or any AC or DC powered electronic device. The TIMER BASE BRP# 581251 is designed to be mounted in an electrical junction box as close as possible to these devices and operated by its front-access battery installed button switch.

This Timer Base delivers 15-amp of power to your system. It is used in conjunction with a relay, providing dual-action control. This timer will work with any low voltage ignition system or any other device that uses a maximum of 15 amperes.

The timer base mounts on the back panel of your cooker hood using the existing screws.

This timer is packaged in an antistatic bag for sales in the EU. The timer base has a switch that must be in position 1 or 2 to work properly. There is no light associated with this timer base, nor a bi-color LED indication. The reset knob is on the right side of the front cover, it is vertical with an up arrow and a down arrow. On the backside of the front cover there are two mounting holes spaced 2 inches apart from each other at 2 and 10 o'clock, these are standard M4 mounting holes. Timer bases may need to be taken to an authorized Cumm

The timer base has a durable housing and a bright LED display, with an easy to use knob for programming application events throughout the day. The timer is designed to be straightforward, simple to install, and easy to use.