York S1-373-27975-002 COIL,FLEX W/DRAIN PAN

COIL,FLEX W/DRAIN PAN

The York S1 Series 1/2" X 20' FLEX W/DRAIN PAN Pre-assembled, non-mechanical refrigeration coil is for retrofit and new unit installations. This coil is designed for a primary or secondary coil in a packaged system that is a horizontal split system with a condenser section mounted above the evaporator section, including all types of self-contained units.

The Flex Coil Style York Condensing Unit Heater S1-373-27975-002 is an ideal addition to homes and businesses where size is a concern. Unit will heat area up to 2,000 sq. ft. It has a 3/4" copper line set with a drain pan and a filter drier. The flex coil is 23'/7m long and made from a food grade material.

Send power to the front of the refrigerator with this 29 inch (73.7 cm) coil for coil-in units. Includes drain pan.

The York coil system includes a 25 foot FLEX dryer duct, 3 inch inline cap and fittings to connect to up to two dryers. The YORK wet/dry high efficiency condensing gas water heater has an Energy Factor of up to .99.

The disposable coil and pan water filter cartridge fits the Rheem and Ruud 50 and 60 gallon gas and electric tank-type water heaters with four horizontal burners.

The S1 Series heating coils are designed to meet the demands of high-temperature heating requirements. These coils are built to last through harsh conditions. The unitized design is provided with a flexible conduit which will adapt to harsh field conditions for easy installation.

Help your customers find their perfect air conditioner with the multi-step York Product Finder. This module allows users to click "Advanced Filter" to select the BTU size, price range, electric type and other specifications for their new York central air conditioner. Other features include a "Product Comparison" tool that allows shoppers to see product sizes up to 50%.

Replacement grill parts from York

Adding and replacing air and other gases and liquids in the vapor compression cycle (refrigeration cycle) of a refrigerator or air-conditioning system can often be done using a flexible tube with a fitting at one end. The fitting, which is usually made to the shape of the matching pipe, is attached to the gas or liquid line that runs from the compressor or other component inside of the unit, and has a pressure regulator that ties into the other gas or liquid lines.

A non-ferrous, continuous, formed metal core wound with insulated wire, formed in a helical configuration. The winding pitch of the coil is determined by the number of windings per unit length, the pitch being the pitch of the pitch circle of the coil. Multiple coil lengths are wound under controlled conditions to produce an evenly distributed winding pitch in which pitch diameter and pitch circle diameter are within prescribed limits.

The York S1-373-27975-002 is perfect for both automatic and gravity feed evaporators. All rubber construction makes it ideal for use in municipal drinking water treatment facilities.

This York heat exchanger uses tough, high-grade tinned wire to ensure a long coil life. The heavy-duty construction and durability of the exchanger contributes to a lower cost per connection hour compared to other types of heat exchangers. And it's built to last – because the cost of replacement is so costly, it's important that you don't have to replace your heat exchanger for years.