OTC OTC44797 Collet Half

Collet Half

This push adapter is primarily used for automotive and marine repair

It converst oem style v-nose (45 degree) to a straight push configuration

The conical nose assists in pushing the steel I-beam over obstructions such as ceiling joists, beams, trusses and even walls that are not plumb

V-Nose Adapter

The OTC215703 has a 1-1/2" threaded male end and a female threaded end that mates with the male socket on V-NOSE tools

The straight push adapter is commonly used on seat brackets, exhaust manifolds, oil pans and alternators

5mm) hole

The OTC OTC215703 Tools 1-1/2" Diameter V-Pushing Adapter allows you to use a flat blade screwdriver for prying or scraping

This simple yet effective tool is built from strong, high-quality materials that are meant to last a lifetime

We have the adapter available in our inventory at a low, discounted price

The V-Pushing Adapter is a simple and effective tool for driving screws in hard-to-reach places

In order to use this product the v nose must be ground down to 2 1/2" diameter

1-1/2" diameter

10 lb

The Adapter allows a 1-1/2? V-Nose Hammer to be used as an impact driver

This adapter is used to adapt the V-NOSE series of grabber tools for use on 1-1/2 inch diameter conduit or pipe

This adapter features a V-Nose and is 1-1/2" in diameter

It is made of high-impact plastic

Diameter - 1-1/2"

To order, call our toll free number or use our online shopping cart

This tool is perfect for driving 3” and 4” screws in laminates, hardwood flooring, linoleum and ceramic tiles

The specialty adapter allows you to apply force to the screw at an angle, saving you time and energy when working with difficult angles

OTC OTC215703 Tools 1-1/2" Diameter V-Pushing Adapter

Made of forged steel, it is 1/8" (3mm) thick at the tip, and has a 15/64" (9

This adapter is also very useful for installing crown molding

The 1-1/2" (38mm) diameter adapter weighs 0

This adapter slides onto the end of a 1-1/2” diameter beam and it has a conical nose in lieu of the usual flat face

One of the best ways to prevent hand, wrist and elbow injuries when working with long I-beams is to use a tool known as a V-Pushing Adapter