OTC OTC-1184 () Cone Type Puller.

Cone-type Puller

5 seconds) or “Standard Test” (2 seconds)

It provides a direct reading of the ignition spark gap, as well as an audible tone and flash-back light that indicate when the ignition gap has been closed

The voltage developed across the terminals is measured and compared with the voltage produced by a known good coil under test

The user may select between two ranges for any given test: “Quick Test” (1

This is an alligator clip tester for testing automotive, marine or small engine plugs

OTC’s new OTC-6589 Electronic Spark Tester is a completely new concept in ignition testing and evaluation

The resistance of this tester can be adjusted to obtain various source resistances

This tester checks the ignition system for intermittent and/or weak spark by producing an audible tone when a sufficient high voltage is applied

OTC OTC-6589 Electronic Ignition Spark Tester

It can also be used for testing the operation of glow plugs on internal combustion engines

It is easy to use and very portable

The tester is made up of a resistance, a capacitor, an inductor and a light emitting diode

The OTC-6589 Electronic Ignition Spark Tester is a compact, easy to use tester for testing the condition of spark plugs and ignition systems on both gasoline and diesel engines that use a conventional plug or dual electrode (DIS) type spark plug

This electronic ignition spark tester provides a convenient way to test ignition systems on gasoline engines

This instrument is designed for testing the ignition spark of gas and diesel engines without disassembling the spark plug or connecting any wires

Electronic Ignition Spark Tester is a device that was specifically designed to test the spark output of gas-fired ignition systems

Simply connect it to the plug wire, then use the button to activate the electrodes and see if you're getting a good spark

In addition, the unit may be reset to zero between tests and automatically shuts off after 30 minutes of non-use to conserve batteries

A small, handheld tester that allows you to test the spark plug of your generator, automobile or other internal combustion-type engine

For use on conventional and computer controlled ignitions

Ever tried to test your spark plug by hand and had trouble getting the electrode to spark? This tester will make sure you know what's going on

OTC-6589 Electronic Ignition Spark Tester is used to test ignition systems on gasoline, diesel and other engines

The tester can be used with either 12-volt or 24-volt electrical systems and is simple to operate

A simple, yet rugged design offers the user several unique features including; a small size, light weight and fast response time

Test for open spark plug terminals, for grounds and for shorts in the ignition system

Use with 6V-20kV DC power supply or a battery

The OTC-6589 spark tester is used for testing the spark generated by the ignition system of an internal combustion engine

It is easy to use, quick in response and produces a small amount of sparking during operation

The OTC-6589 is a battery powered spark tester used to test ignitions, ignition coils, and any other electrical device that uses a spark

It is also a good tool to keep in your RV or boat, and to bring with you on camping trips