CONTACTOR for Lincoln - Part# 370067

CONTACTOR for Lincoln - Part# 370067

CONTACTOR for Lincoln - Part# 370067 is a plug-in, normally open overload protector. It has a 16 amp circuit and the control armature operated contactor will allow or interrupt the complete flow of current and voltage to the electrical circuit. This breaker for Pioneer Products Co., Inc. consists of a single pole AND single throw (SPST) normally closed isolating switch used to interrupt electrical current flow. Contactor must be neutral bonded to a permanent grounding electrode or metal enclosure.

The CONTACTOR for LINCOLN - Part# 370067 is the correct replacement part for the below (similar to) model numbers:

A contactor is a switch that permits electrical circuits to be activated and deactivated automatically by the opening and closing of contacts. Contactors are typically used to control larger motors, such as those found in appliances or machinery. It's Popular because Our Contactor 370067 Replaces many contactors for Lincoln Motor Co., AC Motors, Anderson, Baldor, Bosch, Cutler Hammer, Deltran, General Electric, Coan, Fuller Schaefer, General Switch & Signal Marelli & Arcolectric.

The CONTACTOR opens up a world of possibilities for your Lincoln PowerMIG 200, offering 18 MIG and 5 Stick/TIG rotary functions. With pulse style control and true current and frequency monitoring, you’ll have total control over your weld. The CONTACTOR is a must-have accessory for the PowerMIG 200 welder that every welder needs to expand his/her capabilities.

The CONTACTOR for Ford is a hard-wired electrical device that tells the starter when to crank. It is mounted inside of the dash and the installation requires a deep, hard wiring and proper mounting to serve its properly.

The CONTACTOR is a part of the starter system and is used to send current from the battery to the starter in order to turn it and start the engine.

The CONTACTOR is the safety control switch that replaces the hand-operated shutoff valves commonly found in most water heaters.