Honeywell VBN2CMPX0000 CONTROL BALL VALVE - 1 IN.

CONTROL BALL VALVE - 1 IN.

The VBN2CMPX0000 control ball valve has a 1 in. NPT connection and features an electrode limit switch. It can operate at up to 50 psi and is made with stainless steel. A hex plug (extension) is included for use in electrical boxes, and it can be used with multiple conduit types, including plastic pipe. The ball valve is designed with NEMA 4 black enclosure protection against dust and moisture, and the packing gland seal is rubber-lined.

Let your system work for you with a Honeywell Control Ball Valve. These valves are rated 1 inch and come in chrome or white. This item is designed to be used with water systems only and is not for use with fuel lines or other fluid systems.

The VBN2CMPX0000 Control Ball Valve has a 1 Inch NPT connection. The Honeywell VBN2CMPX0000 Control Ball Valve is designed to automatically turn on and off at preset set points. This control ball valve includes a red hinged handle to actuate the valve. The Honeywell VBN2CMPX0000 Control Ball Valve is designed for use in commercial HVACR systems.

This control ball valve (Spring Return), used for hot gas retraction and isolation, works with 2 in. male-hub connections in a nitrogen system. The ball valve can be manually inverted to position the flow up or down. The flow is reversed by pushing the handle upward, which springs it to its full open position, then pressing it back down again. The control features a manual handle with a release mechanism that does not require a wrench for adjustment or removal of the handle.

Control ball valves feature a single operation knob that is factory preset to the desired valve position. Long-life stem provides exact position feedback while an internal seal minimizes ball contamination.

Designed to be installed on main and branch lines, this ball valve has a 1-in. inlet/outlet size. Its self-locking seat assembly helps prevent side flow, minimizing leakage, and the device can be installed horizontally or vertically.

The VBN2CMPX0000 Honeywell Control Ball Valve is a control valve designed for use with commercial water supply systems. It is used to control the operation of hot water water heaters. The rounded design and soft coating make it resistant to dust and abrasion. The ball handle permits easy manual operation. Valves are placed in line to control flow between the storage tank and hot water heater, or to shut off any portion of the system, such as main feed from the street service line, heater, or other parts of the system.