OTC OTC-7991 () Cooling System Pressure Tester.

Cooling System Pressure Tester

This is especially true when you are working on an engine in the vehicle

The pilot bearing is removed with the rollers, leaving little or no damage to the housing or crankshaft

This pilot bearing puller is used to remove the main and pilot bearings

The OTC 7319 is designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used

D

The OTC 7319 fits in tight places where a slide hammer cannot be used

The OTC7319 is designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used

Capacity of 7/8" to 2", I

The tool is pulled by a drill or air gun

The OTC 7319 has a 4” diameter handle with rubber pads, and an 8" extension shaft

is the ideal puller for pulling flywheel pilot bearings in close quarters where a slide hammer cannot be used

The OTC Puller pilot Bearing Tool is designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used

65 lbs breakaway force, 21 lbs maximum pulling capacity

Reach: 1"

Operates on many models with engine in chassis

This PULLER works well in tight areas where a slide hammer cannot be used

Operates on many models with engine in chassis

It has a capacity of 7/8" - 2", I

, Reach: 1"

Capacity of 7/8” to 2”, I

The OTC 7319 operates on many models with the engine in the chassis

It can also remove some crank pin bushings and crankshaft front seals

The OTC 7319 is designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used

It gives a more controlled and safe removal of the bearing

The OTC 7319 PULLER PILOT BEARING 7/8 TO 2IN

It operates on many models with engine in chassis, and has a capacity of 7/8" to 2", I