Copeland 918-0056-10 CORPORATION 918005610 CRANKCASE HEATER

Belt 120v 150W Crankcase Htr

The Copeland 918-0056-10 918005610 replaces the following part numbers: 11104, 915630M1, 915630M2, 11106, 92029. The Copeland Part No. is 918005610, the Brand is Copeland and the supplier is CORPORATION. This part has a belt type of 120 v and a wattage of 150W and requires the number of units of 1. This Copeland Crankcase Heater replacement part is not OEM and was built for regional sales and may not have been distributed in your area. You can use OEM Brands

The WA-918 is a forced air crankcase heater with a 3/4" NPT connection. This heater has an element rating of 120V and 150W.

The Copeland Corporation 918-0056-10 is a crankcase heater designed for diesel engine applications. It has a belt that powers it through the pulley assembly attached to the crankshaft of the diesel engine. The production date of this item is 10/19/1991. The Copeland Corporation 918-0056-10 weighs 200 lbs and comes with no warranty.

This mechanical seal has been changed to a new design and is now a heat activated seal for use with crankcase heaters. This seal can be used with many older Copeland units originally equipped with the belt type seal including:

Built for severe duty service, Copeland Corporation's line of Crankcase Heaters are designed to provide reliable and economical protection against low temperature hazards in today's high-powered diesel engines. Designed to meet the needs of today's trucking industry, the line includes models that are electrically ground or water cooled and warranted to operate at -56°F (-49 degrees C)

The Copeland™ 918-0056-10 CRANKCASE HEATER is designed to provide quiet, efficient and dependable heat to the crankcase of a compressor.

The Copeland 918005610 crankshaft heater is the replacement for Copeland model numbers 918-0056, 918-0056-01, 918-0056-02, 918-0056-03, and 918-0057. This heater comes with a 3/8" NPT fitting and a 3/8" pipe connection.