Amana CAUFA2418B6 Corporate CAUFA Uncased Aluminum Evaporator Coil, Upflow/Downflow, 1.5<multisep/>2.0 Ton, 16.00 in Cabinet with Orifice Expansion Device

CAUFA Uncased Aluminum Evaporator Coil, Upflow/Downflow, 1.52.0 Ton, 16.00 in Cabinet with Orifice Expansion Device

This CAUFA2418B6 uncased aluminum evaporator coil has a refrigeration capacity of 1.5 to 2.0 tons. The coil is fully assembled and weighs 183 pounds.The coil dimensions are 16 inches high, by 18 inches wide, by 17 inches deep.This item is covered with a 1 Year Warranty

This uncased aluminum evaporator coil is designed for use with heat pumps and split systems. The coil has 3640 BTU per hour cooling capacity, with 2.11 kW heater power input, upflow and downflow airflow capacity of 2.0 tons, and a 16 in cabinet width. An orifice expansion device is included.

CAUFA Upflow/Downflow 1.5"2.0 ton offers the best standard warranty in the industry for an upflow/downflow coil. Its unmatched reliability is ensured with multiple safety features built into the coil. The CAUFA provides high efficiency, up to 29 SEER-33 EER with a voltage range of 208-230 Volts. This coil can be used for climates that are very hot and dry or for climates that are very cold and humid.

The superinsulated CAUFA 2-ton upflow/downflow evaporator coil is ideal for residential and light commercial air conditioning, heating and hydronic heating applications. Available with NEMA 12 or NEMA discrimination (1-piece construction), this coil features a high-quality aluminum alloy core that gives the coil superior heat transfer characteristics and durability. With an all-welded design, the CAUFA coil makes assembly faster and easier.

The CAUFA2418B6 is a 2 ton cold air unit designed for upflow/downflow air distribution systems. It offers a 16 inch depth which accommodates the deeper units of recent model equipment. This unit comes standard with an orifice expansion device, which provides better control of airflow through the coil.

The ACA Series ductless split systems are ideal for residential applications where flexible capacity is required. The CAUFA2418B6 includes a 1.5 to 2.0-ton XP Series aluminum evaporator coil, a 16 in w x 18 in d cabinet, R410A refrigerant, and a factory-installed wireless indoor room temperature sensor.

The Corporate CAUFA2418B6 evaporator coil is designed with an internal expansion device to allow an even flow of refrigerant throughout the system. It uses a aluminum fin structure and a copper tube evaporator coil to reduce system pressure.

The Carrier CAUFA series of direct expansion cooling coils provide commercial comfort solutions with efficiency, reliability and ease of maintenance. They are designed for standard split systems and multi-split system in commercial air conditioning systems. Generators can utilize natural gas, propane or CNG fuel while selected units are available with single fuel capability. The cooling coils can be matched with the appropriate cooling capacity and BTUH in order to meet your requirements.

These no-cased coils are designed for evaporator duty, underfloor mounting in unvented construction with or without side return and the coil is exposed to the room. They can be used as part of a radiant floor heating system in applications where required.

Cold air is pulled in from the outside, passing through an air filter and then to the evaporator coil where it is cooled by a refrigerant circulating within the coil. The cooled air is then forced through an orifice plate and into your home.

Don't forget to ask about our selection of uncased coils for residential and light commercial use.

BriskHeat offers a wide variety of brands and product lines for the best possible customer experience. Please feel free to contact us for any further assistance.