Couplers & Bearing 8JE "INSERT EPDM "INSERT EPDM

"INSERT EPDM

Insert EPDM

The 8JE Integrally Bonded Couplings are composed of three parts: A stainless steel coupling body, an insert and a rubber outer cover. The insert provides the rubber to metal seal. The rubber outer cover encapsulates the insert and gives the EPDM our patented one-piece construction. When installed into an above-ground pipe, the 8JE forms a high torque, vibration proof joint that will outlast the epdm itself

Couplers & Bearing 8JE are used to couple two adjacent section which are connected through packer, liner and tie on the casing. This EPDM ring will insulate the grooves up to the bottom of the seal in order to prevent mud from entering through the space between insert and casing.

EPDM seals are typically used on:

This is a heavy duty Coupler and Bearing EPDM Rubber 8JE. This Couplers & Bearing 8JE is made by BorgWarner Turbo Systems.

These couplers and bearings are not just prettier than the standard coupler they are also far more efficient. Their robust design means that these couplers and bearings can take the worst of conditions. They feature EPDM anti-friction coating and a one-way compensator to reduce rolling resistance.

Perfect for home/extermination and pest control. Numbers featured on the bearing are the inch sizes for each pipe diameter.