OTC OTC42542 Tools & Equipment CROSS BLOCK (-)

CROSS BLOCK

The OTC42542 CROSS BLOCK makes it easy to make quick, precise changes to mounting angles on any CRAFTSMAN® garage door opener. It fits into the lower track and holds the door at nearly any angle by providing a stable lower side support. This CROSS BLOCK contains a standard mount below with an adjustable channel that has a 90° stop, allowing you to change the upper mounting point easily by sliding in the movable wedge. It is used to increase or decrease the position of an existing T-rail without having to replace an entire rail track.

The OTC CROSS BLOCK…       - Improves the accuracy of turning operations - Minimizes run-out in the cross slide - Eliminates backlash - Eliminates sideways movement of work piece when lathe is under power

The OTC CROSS BLOCK is designed to isolate the transmission drive line during clutch disc removal. This tool comes with a proprietary magnet at the tip of each arm so that it may be used in all fluid transfer applications where magnets and magnetic contaminants are a concern

OTC Cross Blocks are a two position Cross Block that locks and unlocks easily from any position. The OTC Cross Blocks are used in the lock bays of forklifts, buses, and delivery trucks. They securely hold a fork truck in place by allowing the forks to switch from forwards to reverse without damaging your equipment's forks under high torque conditions.

The cross block is used to lock an unattended vehicle with the ignition ON and in DRIVE or REVERSE. The simple turn of a wrench blocks the ignition key from turning, thereby preventing unauthorized use of the vehicle.

The OTC42542 CROSS-BLOCK (-) is a check valve that allows fluid to flow in one direction only. It features a high pressure polypropylene housing for dependable performance and high chemical resistance. It can be used with gasoline, alcohols, and solvents, as well as gaseous and highly compressible liquid gases. It is intended for use in vent lines and control line connections because of its ability to stand up to high pressures without leaking.

OTC Cross Blocks are designed specifically for supporting crankshaft flex joints as replacements or for other applications. Their unique construction provides a no leak, impact resistant joint that is both easy to install and easy to maintain.