EATON C25FNF375A Cutler Hammer- 120V 3POLE 75AMP CONTACTOR

120V 3POLE 75AMP CONTACTOR

ACTUATORS, CONTROLLERS & TIMERS. C25FNF375A- Used on HVAC equipment and throughout the electrical industry, this 3-pole, 240 Volt, shutoff type contactor is typically employed to control fan motors on rooftop units or industrial applications. Contacting capacity 75 Amps at 240 Volts. This contactor incorporates two internal relays for open collector output signals and has a standard 5 pin circular connector for the wiring connection.

For applications requiring 120 VAC single-phase power, the C25 Contactor features high-voltage coil with low-voltage mounting terminals. The 3 pole power contacts are capable of handling amperage up to 75A – ideal for maintaining consistent performance in most applications.

The C25FNF375A is a 3-pole tripping type line and load current relay contactor for use on 120VAC systems. It is equipped with a manual reset pilot device. This contactor may be used for new designs or as a substitute for other manufacturers' equipment.

The C25FNF375A AC Contactor, Single-Pole, is designed for 120-Volt, single-phase applications. This contactor features a volt free, manually operated trip coil and is interlocked with a reset assembly. It is used with a trip unit to protect motor starters and other control devices from overloads caused by short circuits or other abnormal conditions.

This contactor is a C25FNF375A manufactured by Cutler Hammer.

The C25FNF 375A is an industrial grade contactor that has been designed and manufactured to meet the demanding conditions of industrial applications.

The C25FNF375A is a Cutler Hammer contactor with quick-connect terminals and features circuit protection.