Danfoss 060L202966 KP73 TEMP CONTROL KP73 TEMP CONTROL

KP73 TEMP CONTROL

The Danfoss VLT series electric water heater control is an economical and versatile way to manage your existing on-demand water heater. The control works in conjunction with any on-demand water heating system that has a maximum input of 13 amps, and it features a digital display and two independently adjustable zones to help you manage comfort levels in two different spaces at once. FEATURES OF THE KP73 TEMP CONTROL: * Digital thermostat with programmable options, internal fan and sensor to keep water

Danfoss KP73 Temp Control, Secondary Control Unit, USED in DRYER VENT-KP73 TEMP CONTROL--CONTROLS AIR FLOW and TEMPERATURE-VENT EXHAUST-USED

The Danfoss KP73 temperature controller is a portable unit designed for easy installation and maintenance of indoor unit in domestic/industrial air conditioning systems. The ruggedly built controller features a sealed compartment to protect the circuit from ingress of moisture and dust. It further features an ergonomic design with a display for up to three measured values, as well as indicators for programming and buttons that are large enough to be easily operated by gloved hands. It is certified according to the relevant international safety standards, including

Danfoss 060L202966 KP73 digital water temperature control with embedded pump. The Danfoss KP73 Electric Digital Water Temperature Control Valve cycles water through a delivery to either fish tanks or hydronic flooring systems. It is a replacement for the old Sirocco K364 and the more popular version of this model is the KP72-KP77 which also uses PID (proportional integral derivative) algorithm for better accuracy with no loss of manifold pressure in -5

The Danfoss Variable temperature controller KP73 starts temperature maintenance and set point regulation. The unit works with the heat pump air handling units and with electric heaters on all ranges from 15 kW to 300 kW.

This proportional controller can be used with either hot water or steam for both district heating and domestic hot water applications. It is designed to provide full function control based on temperature changes in the fluid being heated, and maintains constant flow rates even when pressure or temperature varies. The KP73 has three operation modes: * Current Mode * Constant Flow Mode * Off Mode. In Current Mode, heating output is directly proportional to flow rate.

Danfoss P73 air-conditioning controller is compatible with Danfoss standard DANFOSS outdoor condensing units. It has a fully programmable electronic control of evaporator and superheat control, 3 cooling stages, 2 heating stages with high and low settings, +/- 5°C/7°F temperature accuracy in cooling, -2.5 to +3 °C/-4.5 to +5.5°F temperature accuracy in heating, 5 to 45 minute time delay in