Danfoss 065B-8900 "3/4""40/90 ESBE T-Static Bypass" "3/4""40/90 ESBE T-Static Bypass"

ESBE C20 DRAFT REGULATOR 3/4" NPT. 104-194 F

The Danfoss 065B-8900 "3/4""40/90 ESBE T-Static Bypass" "3/4""40/90 ESBE T-Static Bypass" is a single loop type ESBE C20 DRAFT REGULATOR 3/4" NPT. 104-194 F

C20 DRAFT REGULATOR 3/4" NPT. 104-194 F,

The Danfoss ESBE C20 draft regulator is a high quality, 3/4 in. gauge only thermocouple type draft regulator that is suitable for use with domestic and commercial refrigeration applications. It is the original design that was introduced to the market in early 1970's. This model is specifically designed for cooling wine bottles at 90 degrees F with a bulb temperature of 194 F or less.

The ESBE C20 DRAFT REGULATOR (065B-8900) is an energy efficient draft regulator that uses a T static bypass type of operation. This particular model has a capacity of 20 SCFH.

The ESBE C20 is a Draft Regulator for condenser or air conditioning installations. It operates on a constant pressure and way pilot duty cycle system.

The Danfoss ESBE C20 is a series of constant-pressure type back pressure regulators which are used on service hot water tanks or heaters whose pressure must be maintained from very low to very high. The C20 series have a built-in by-pass valve which automatically opens if the downstream pressure falls below, or if the tank becomes filled with air.

Two-stage regulators operate all of ESBE's liquid-cooled screw compressors. The 40/90 models are used when the suction pressure is a minimum of 105 psi and maximum of 160 psi. These two-stage, 100% relief, vacuum/pressure valves, have equal percentage pilot-operated spring-balanced spool valves with two external control lever handles for throttling the high and low side suctions to obtain a constant compressor discharge pressure.