Danfoss 067B3297 Thermostatic Element TEN 5 Thermostatic Element TEN 5

Thermostatic Element TEN 5

The Thermostatic Element TEN 5 is a high quality replacement thermostatic element for both Airco and Danfoss AC units.

The Danfoss Thermostatic Element TEN 5 is a replacement/spare element for use with the TEN controller series. It has a 4-pin connection and is suitable for systems up to 2500W.

The Danfoss 067B3297 Thermostatic Element TEN 5 controls water temperature in a hydronic heating or cooling system. It features a standard 1/8-inch male pipe thread (NPT) inlet connection and a 2-inch diameter outlet to accommodate various installation scenarios. The Danfoss 067B3297 thermostatic element has an operating temperature range of 32 to 140 degrees Fahrenheit, and it helps maintain temperatures to improve comfort zones and extend system life.

TEN 5 is the compact thermostatic element with 5 watts of power. TEN 5 has been designed to fit most of Danfoss wall mounted systems available on the market today.

Nichrome wire heating element 12V/250W. Thermostatic control with thermostat to regulate temperature (max 250°C), for continuous use in circulation pumps or small resistance heaters for example, version TEN 5 included for 22 mm tubes and TEN 15 for 32 mm heater tubes.

The Danfoss TEN 5 thermostatic elements are compatible with downflow and horizontal applications, and can be mounted horizontally or vertically. These elements have 1/2" MHT threads.

The Element TEN is a single-stage, thermostatic radiator valve intended for installation on radiators in heating systems to regulate the temperature. The valve uses an electrical temperature sensor and control circuit to modulate the flow of heat from the radiator. The large sensing area ensures rapid response to changing room conditions.