Danfoss 068Z3206 "3/8""x1/2""Flare "3/8""x1/2""Flare

"3/8""x1/2""Flare

The Danfoss 068Z 3206 3/8x1/2 flaring tool is a must for any mechanic s tool box. This is a 1-piece hydraulic flaring tool with a permanently replaceable cutting blade. This flaring tool are nickel plated to protect against corrosion and wear. The cutting edges can maintain accuracy under rigorous use. Includes interchangeable cutting blades that can be replaced in seconds.

This flare is used in Danfoss split A/C units. The outside diameter of the flare fitting is 0.500, with a male inside thread of 0.375. The inside length measured from the end of the flare to the blind hole in the fitting is 2". Mating service fittings must have an inside thread of 3/8"x1/2". "

Danfoss manufacture a wide variety of Flares and where available we list the recommended pulley size which can be purchased seperatly for your own project. When selecting the correct flare, the first digit is the outside diameter of the Flare, followed by the lining diameter (the inside of the tube) in mm. "3/8

Danfoss 068Z3206 Polymer 3/8x1/2 Ancillary Outlet ***

Danfoss 068Z3206 "3/8

The Danfoss 068Z3206 3/8

Leak-proof design increases fluid flow