Danfoss 102G3432HS TFS4.5FT R134ATropComp115-127v

TFS4.5FT R134ATropComp115-127v

TFS4.5FT R134ATropComp115-127v (product ID: 102G3432HS)

This Danfoss TFS4.5FT R134ATropComp115-127v Condenser Fan Motor is a replacement for part number: WT412-72AG, SWM2-72AG, CWS12B1120AC1A1, 562996-3010, 5629963010, 562996-2410, 5629964210, 018R1452260D, S093-01334B.

Control the humidity and temperature in your home with this Danfoss TFS4.5FT R134ATropComp115-127v thermostat. The built-in room sensor automatically tracks the temperature in a room, or you can connect it to your new WiFi device to learn when the family comes and goes for more accurate programming. Enjoy full Wi-Fi control from your tablet or smartphone, at any location you choose. It's easy to install, with no other wires required but a power supply

The Danfoss TFS4.5FT R134ATropComp115-127v is a split-capacitor run capacitor that is designed for A/C units. It has an output voltage of 115 volts and an input voltage of 127 volts. The capacitance of this run capacitor is 4.5 farads, and it comes with prongs that are 5/16" X 3/8". The maximum amperage for the Danfoss 102G3432HS TFS4.5FT R134ATropComp115-127v is 8 amps and the minimum starting temperature is 4 degrees

The Danfoss TFS4.5FT R134A air-conditioner, with a capacity of 460m3/h, offers a high performance cooling capacity for low temperature indoor climate. The compact air-conditioner is simple to install, and all filters are inside the unit so that you don't have to climb on ladders or into attics to change or clean them. The system uses R134a as a refrigerant which gives increased energy efficiency compared with previous systems.

The Danfoss TFS4.5FT is a fixed, multi-function, wall mounted unit that has four main components; Filter Storage Unit(FSU), Re-circulation fan unit, Air flow temperature controller and On/Off switch with cooling power supply. The TFS4.5FT can be connected to a renewable energy device (Hybrid) or directly to the mains electricity with the help of an integrated energy management system.

The Danfoss TF4.5FT R134a is used to replace the evaporator in the system. This appliance uses an energy efficient heat pump technology that outperforms other technologies by transferring heat from a cold area to warm area, without the typical conversion of hot air into cold air. It provides all of the components needed to reform your old unit and quickly install a new evaporator in most fresh-air systems.