Danfoss 117U4123 OVERLOAD RELAY OVERLOAD RELAY

OVERLOAD RELAY

The 117U4123 Overload Relay by Danfoss is a component that helps protect your motor from overload damage. This relay prevents the motor from getting damaged when it is overloaded. Overload relays play an important role in keeping your appliances, motors, and other machines functioning smoothly.

DESCRIPTION: The Danfoss 117U4123 Overload Relay sits on an easy to bolt base. Part of a group of components from the Danfoss range which has been designed for use in both commercial and industrial environments, it is made using the finest material and built to be durable. This complete overload relay unit is easy to mount onto a base with a diameter of an impressive 160mm. It replaces the original 2 pole relay in the majority of systems using AC motors.

The 117U4123 is an overload relay module for the 117/117S series of controllers. This product features a trip point adjustable from 0-127% with an input voltage of 24-240V AC. This product has a normally open relay output with switching capacity of 10A, maximum contact resistance 2.6 Ohm, and switching voltage 25VDC at 50 mA

Protect your equipment from overloads with the Danfoss 117U4123 Overload Relay. This relay has a compact, DIN rail mountable design. It uses 4 terminal pins to make connections. The Overload Relay is rated at 10kAIC at 30/60/277VAC and 3kAIC at 120/208VAC, 120/240VAC, and 240/277VAC.

The Danfoss 117U4123 overload relay protects equipment such as refrigeration and air conditioning systems. The thermostat in these systems should never display the tendency to close at a high temperature or remain closed at a low temperature. With the Danfoss 117U4123 overload relay, it is possible to adjust opening reactivity.

When compared with an overload relay, a standard time-delay relay offers a longer delay for overcurrent protection and is therefore more suitable. The Danfoss 117U-4123 induces no surge in the current and provides reliable overload protection with programmable time delay up to 5 seconds.

Our Danfoss 117U4123 Overload Relay is easy to install and is ideal for use in conjunction with a danfoss distributor. It has overload protection with normally open contacts that switch to a closed position when the current exceeds 150mA. The contacts, protected against short-circuits, can be connected in parallel with the load to provide circuit overload protection. Under normal conditions, they are open and allow the load and the controller to operate independently without affecting either. When an overload occurs at one part of the circuit, the relay contacts close, breaking the circuit at the point of excessively high current. In this