Danfoss 117U6000 COMPRESSOR RELAY COMPRESSOR RELAY

COMPRESSOR RELAY

The Danfoss 117U6000 COMPRESSOR RELAY is one of the many great products from Danfoss. The Danfoss brand is known for it's innovation and being a market leader.

The Danfoss 117U6000 COMPRESSOR RELAY has been designed to control COMPRESSOR UNIT COMPACT. The relay is used in heat pump systems and the whole range provides optimal solutions for applications such as DPHP, HPHPV, and PHEV. The Danfoss product portfolio includes as well relays, thermostats, pipe sensing temperature and pressure sensors as well as software tools.

Compressor Relay is available for Danfoss Drives above 07/2005. Compressor Relay will allow the controller to monitor the compressor status and alarms. The Compressor relay has a centrifugal switch (2), and two optocouplers built in (1) Connects to any accelerator input (2) The relay arm has an indicator light, which gives an indication of the compressor.

The 117U6000 is a Danfoss chain driven compressor relay with an integrated capacitive discharge contactor rated at 6A/50-60VDC.

The Danfoss 117U6000 compressor relay or motor contactor as it is also known, is an electronic device that can replace a normal thermostat. The electronic control will switch your air conditioning system on and off when the temperature commands. By using this simple installation kit, you will be able to switch your air conditioning system by remote control at distances of up to 100 metres. This kit also comprises other vital parts such as cabling, connectors and an adaptor plate.

Danfoss 117U6000 Motor Protection Component Relay Compressor Relay - 6000 Series Voltage 6.7 +/- 10% VDC Coil Resistance (Ohms) 0.05 +/- 10% Coil Inductance (MA/1MHz) 0.05 +/- 10% Power 5 VA DC Resistance Measuring Current % <= 1 Transient Protection 250 50 Max input voltage 23 Frequency 0 - 450 Hz 0.5 - 3 s Duration t < 10 ms Proximity Detection +12 - +48

The Danfoss 117U is a compressor relay with two contacts and one earth for actuated control of compressors and valves. It can also be used in safety circuits. The device features an NTC-type operating element and will open normally at temperatures between 77°C (170°F) and 77.5°C (171°F), and closes normally at temperatures above 77.5ºC (171ºF).