Danfoss 119-5659 1/15HP 208/230V FAN MOTOR

1/15HP 208/230V FAN MOTOR

The Danfoss 119-5659 1/15HP 208/230V FAN MOTOR is perfect for your needs

Our vision is to make our customers’ life easier through a consistent flow of innovations that enable better comfort, energy efficiency and sustainability

RPM: 1725

Danfoss is a global supplier of components and systems for heating, cooling and refrigeration, as well as industrial automation

Danfoss designs, manufactures and markets products and solutions for the global heating, cooling and refrigeration markets

These are cooling fan motors for commercial ceiling fans, the 119-5659 has an efficiency rating of 0

The company offers a wide range of products for all segments: refrigeration compressors and pumps, air conditioners and heat pumps, chiller equipment, desiccant dehumidifiers and evaporative coolers, heat recovery equipment and general industrial motors

Neuco Inc

95 mounting hole centers

The 119-5659 has a short-circuit current of 0

0089 amps is the max current draw at 208V, if running the fan motor at 230V then the max current draw would be

Danfoss 119-5659 1/15HP 208/230V FAN MOTOR

0089

1/15HP 208/230V FAN MOTOR

, 1725 RPM, 11500 MINIMUM SPEED TORQUE (FT LB) 1

The completed assembly measures approximately 7 inches in length and 3 inches in width, with the mounting flange measuring approximately 4 inches in diameter

For over 75 years, Danfoss has been a worldwide leader in the design and manufacture of intelligent, energy-efficient solutions that improve the efficiency, comfort and sustainability of buildings through tenacious commitment to research and development

217; Full load amps: 0

This Danfoss electric motor is designed to run at 208/230Volts and has an amps rating of

1/15 HP, 208-230 VAC, 60 CYCLE, 60 HZ

The 119-5659 by Danfoss is a 1/15HP 208/230V FAN MOTOR, with a Nominal Speed of 1150 RPM, and a Phase of 1

It has a Full Load Amps Rating of 0

086 and features a Totally enclosed Nonventilating (TENV) design with ball bearings and carbon brushes

The 0

High quality Danfoss 119-5659 1/15HP 208/230V FAN MOTOR,The 119-5659 is a 1/15HP 208/230V fan motor with a G10 frame, IP55 protection level and 5

The Danfoss 119-5659 1/15HP 208/230V FAN MOTOR is a 25

22 TON, 2250 WATTS

84; Enclosure NEMA design B; Service factor 2

75 amps and has the following electrical specifications: V, 208/230;Hz, 60; HP, 15; Rpm: 0

These are the specifications for the Danfoss 119-5659 1/15HP 208/230V FAN MOTOR

4-oz Indoor Fan Motor for 208/230 Volts, 1 Phase, 60 Hertz operation

is a distributor of Danfoss

0069 amps