Delta ELAVT0001ARI Commercial Electronics: Rough-in Control Box for Electronic Faucet

Delta Commercial Electronics: Rough-In Control Box For Electronic Faucet

Delta Commercial Electronics: Rough-In Control Box For Electronic Faucet

This is a Delta Commercial Electronics: Rough-In Control Box For Electronic Faucet . It's 3" height by 2" width by 2" depth. It weighs approximately 5 oz. In my opinion, it's best for you!

Get the Delta Commercial ELAVT0001ARI Rough-In Control Box for Electronic Faucet and enjoy easy operation, energy efficiency and attractive design. Ideal for all Delta faucets with electronic mechanisms or touch-less technology, this control box allows you to easily interface your water system to a variety of electronic devices. Its retrofit design enables it to be used to upgrade older models and ensure years of extended use and reliable and convenient operation. The chrome finish complements any decor, while an LED indicator keeps you aware of the status at a glance. Delta Commercial Electronics: Rough-In Control Box For Electronic Faucet

For units with Tub and Shower combos or Bath and Shower combos, we recommend using a Delta Commercial Electronics: Rough-In Control Box for Electronic Faucet (ELAVT0001ATI). It features a mixing valve and temperature limiter.

This Rough-In Control Box is designed to be used with an electronic faucet manufactured by Delta Commercial. The control box must be installed during the rough-in phase of any kitchen or bathroom remodel, which means it must be installed before final finish items are being installed. Since the installation will be in a cut-out opening where the sink will eventually go, it must also include a gasket and rubber washers so it will actually seal securely.

The ELAVT0001ARI-DST is a pre-assembled faucet control box with a wire connector needed for DST installation. This Delta Commercial Electronics control box requires a wire connector for DST installations.

Need to faucet electronic interface box? Delta commercial electronics has an answer for you. With its compatibility with the DTR-10A, this unit is perfect system expansion or replacement of interface box.

Add an electronic faucet to your premises with this easy-to-install control box. The control box is designed to work with a Delta single-handle electronic faucet and is compatible with a variety of third-party electronic faucets. The control box is designed to be mounted above the counter, or placed below the counter in a Utility Sink Box or Utility Sink W/ High Rise Faucet Box.

Install your electronic faucet in just minutes with this rugged control box. The ELAVT0001ARI control box allows for quick and easy installation of electronic faucets on sinks, tubs and showers. This rugged design can be used with any Delta Trinsic or Brizo remote valve to provide added on/off functionality on a wide variety of faucets.

Sleek and understated, this control box is designed to allow you to control single function electronic faucet features right from the wall. 3/4" hole required for installation. Center distance required to drill through wall for this product is 11.75 inches (298 mm).

Here's the control box you need for your electronic faucet and any kitchen sink with a single drain hole and an undersink power outlet. The special mounting plate allows you to put the receptacle in the best location for your convenience, and lets you hide it under a cabinet so it's out

You can rely on Delta commercial electronics to help you bring your product designs to fruition.