DRAIN FITTING for Scotsman - Part# 02-3108-01

DRAIN FITTING for Scotsman - Part# 02-3108-01

The Scotsman part # 02-3108-01 Drain Fitting is a replacement part for your Scotsman water softener system. This is the main water output hose that connects to a standard garden hose. This will work with Scotsman self-cleaning or non self-cleaning units.

The Scotsman RWT-1 Whole House Water Filter System uses a standard 3" connection for the water in and water out pipes. The fi ttings used for this connection are called "drain fittings" and are referenced by part number 02-3108-01. The drain fitting is made of brass and is used to attach the water filter tank outlet pipe to the traditional 3" PVC vent stack. There will be two or three of these accessories needed, depending on whether you install the tank on its side or upright.

The Drain Fitting for Scotsman Dishwashers is made to fit the Scotsman Dishwasher models S1M61, S1M63, S1M601C-1M, S1M-605C-1M, and S1MG0.00000.

This is a brand new drain fitting for the Scotsman Ice Machine Series 2. The gas tube that runs from the solenoid to the propane tank has a check valve attached to it, which has a pinhole that must be plugged with this fitting.

An unsealed drain fitting, for use with the Scotsman food waste disposer series. Protect against leaks and spills with this practical fitting. This is a genuine Scotsman part.

This complete kit is designed for use in older Scotsman pool and spa pumps that have been converted to the all-in-one valves. The drain fitting kit can be used with a 1 in. (25.4 mm) or 1-1/4 in. (31.8 mm) standard 1 in (25.4 mm) or 1-1/4 in (31.8 mm) PVC pipe connector as provided by your equipment manufacturer, jet pump, filter, heater, circulation pump and any other plumbing items necessary for your particular installation.

The Drain Fitting is used to install the main water feed supply line from your house to the water softener.