Dwyer Instruments 2300-00 ".125/0/.125"" Magnehelic # Gage"

".125/0/.125"" Magnehelic # Gage"

The Dwyer Instruments 2300-0 Rope Cutter .125" / 0.125" delivers fast rope cutting and has a strong durable design to handle long term jobs. This Dwyer Instruments #Magnehelic gage allows the user to easily view gage functions. It works for ropes or lines up to 1/2" and has a protective, adjustable blade guard helps to protect both the operator and the product from cutting hooks and rope nicks.

The Magnehelic No. Gage can be used to cut up to #1000 wire rope or similar strands. The No. Gage is punched with holes that are proportional to wire diameters, so measurements can easily be made on the blade of the tool without the need for a ruler. The Magnehelic No.Gage is useful for making quick measurements on site or in the office, providing an accurate measurement without the risk of measuring inaccurately by eye.

Handheld Economy Rope Cutter Makes Cutting Rope and Small-Diameter Line a Snap. It can also be used for Trimming and Chipping. Affordable, the cutter's compact body design weighs just 1 lb. and is made of anodized aluminum to withstand corrosive environments.

This economical hand-held rope cutter is designed to cut cloth and synthetic fibers, including fishing lines and cord up to .125"" (3.2mm) diameter. The Hand Held Economy Rope Cutter is constructed of surgical grade stainless steel, and has a special blade edge to improve cutting efficiency. Housed in a durable ABS plastic handle with rubber grip for firm control, this rope cutter can be used as a single or double cutting-edge unit that adjusts easily using the thumb screws. Simply loosen the thumbscrews to switch between single and double action.

Designed for measuring and cutting thin rope, string, fishing line, monofilament, and small diameter wires. .125/0/.125" gauges include a blade guard to protect the gage from damage. 440 stainless steel blade Type-C handle resists corrosion from salt water or other corrosive media. [Model# 2300-00].

The Magnehelic® Pressure Gage 0-3000psi is a durable, economical, hand held instrument that provides a true linear indication of pressure or vacuum. This Features a high accuracy of ±0.25% full scale reading and a wide pressure range. The entire instrument is made with corrosion resistant material to ensure long life with minimum maintenance required using this shear cutter is easy and safe as the cutting blades are always concealed within the bottom housing with only the rope visible.

The economy rope cutter is a hand held tool that can be used to cut small diameter ropes and wires. Powered by high density, long life batteries (included) this precision hand held device gives the user the ability to check for breaks in electrical insulation.

Designed for the user with a small space or limited storage space. The economy hand-held rope cutter features a cutting blade that is hardened to HRC62. A handle of polished aluminum with molded non-slip grip relieves stress on worker hands.

This lightweight rope cutter scalps ropes with up to .125"" cable diameter. Hand held rope cutting scalper makes use of hot knife technology that quickly and cleanly cuts rope. Smaller, lighter design is ergonomically shaped for easier use. A gasket seals out oil, dirt and moisture. This hand tool is ideal for cutting monofilament line, braided line, swivels, slings, etc.

The Magnehelic pressure gage is a precision instrument designed for accurate measurement of process pressures ranging from a few inches of water column to 1000 psi. Pressure ranges from 0-10 inches of water column to 20 - 1000 psi are displayed on a large, easy to read dial. The scale is calibrated from 0-1000 psi with .1 increments over the standard range and .01 increments from 1000-22.0 inches of water column.

The Magnehelic gage is accurate, lightweight and made of durable plastic. The gage is designed to withstand hard use in extreme temperature environments, making it an ideal choice in the oilfield industries.

Dwyer Instruments 2300-00 is a hand held rope cutter. of 2,300 lb. tensile strength, for cutting of synthetic and steel ropes without fraying of the rope material, its thimble type half twist knob with positive stop allows for ease of operation, a side plate protects the pivot pin from any impact damage and conforms to ANSI requirements.