Dwyer Instruments V6EPB-B-S-6-0 "2"" SPDT Xprf Brass/SS Flow Swt"

"2"" SPDT Xprf Brass/SS Flow Swt"

The V6EPB-B-S-6-0 SPDT (Single Pole Double Throw) Manual Valve with Brass/SS Construction is an electrical actuator that controls a valve and can shut or open, allowing or restricting flow of fluid in the process. The V6EPB-B-S-6-0 is compatible with hot water, alcohol, kerosene, or hydraulic fluid.

Solenoid - SPDT - 1/4" FNPT Brass/Black or Stainless Steel Body, 4.5 to 5.3 PSI, 0 to 4000 GPH, 2"" Face 10 to 15 Degrees C

Two-Stage SPDT for Water, Water/Air or Air-Only. Flow Control: 100 GPM to 500 GPM; 90 psi (6.3 bar) to 700 psi (48.9 bar). Connection Size: 1/2" NPT. Body Material: Brass or Stainless Steel. Actuator Type: Lever, Metal Lever, Solid Metal Lever. Switches are available with brass or stainless steel lever and body material options.

Flow Swt" Flow Switches combine small size with high accuracy, dependable performance. The V Series stainless steel stem/seat assembly is a highly polished taper-fit shear pin design that's simple to maintain. An overcenter closing head screws on and off easily for quick servicing. These Flow Swts come standard with flow adjuster capability, and come in either full bore orifice or restrictor bore designs.

The V6EPB is a 2"" mechanical pressure/flow selector switch designed for use as a pilot operated test set. The three independent SPDT switches are rated to handle up to 150 psi/10.3 bar and are used in conjunction with the companion V7EP1 pilot and V7EP2 indicator/indicating gauge.

Dwyer Instruments vinyl diaphragm pressure switches with brass or stainless steel bonnet are suitable for general non-hazardous process applications. The standard body is made from porcelain-coated 1/4" steel and the stainless steel version has a special powder coating. Connections are threaded inlet and outlet NPT fittings. The unique diaphragm saves the need for a spring assembly while maintaining a differential between high set pressure (105 psi) and low set pressure (0 psi).

The V6EPB Series 6 Position (2 Way) Isolated SPDT with Boot is suitable for control of multiple circuits from a single point and is designed for use in panelboards requiring limited space. The Isolated SPST Flow switches are rated for 12A and 240/250 Vac ambient temperatures. A compact design with maximum flexibility.