SCULLY 15182 - 01421 ECON-O-TANK GAUGE FOR TANKS 26"-27" DEEP 575-11

01421 ECON-O-TANK GAUGE FOR TANKS 2

The SCULLY 15182 - 01421 ECON-O-TANK GAUGE FOR TANKS 26"-27" DEEP 575-11, is a best seller in Speedometers .

DESCRIPTION: The Econ-O-Tank gauge is designed to measure the level of liquids in any type of tank between 26" and 29" depth. The durable plastic construction gives you a clearly readable gauge, and includes easy to install mounting hardware so you can quickly get it installed and see your level for the first time.

The Econo-Tank Gauge for Tanks 26"-27" Deep is constructed of a fibreglass reinforced plastic that is stronger than glass. The gauge comes with a 3/8-inch NPT thread and does not include a dial.

The Econ-O-Tank Gauge is a cost-effective solution for identifying horizontal medium density fiberglass storage tanks. It is used to verify the tank's "full" or "empty" level relative to the integral solid liquid float.

The Econ-O-TANK gauge sender fitting is designed to give you a direct reading of the level of your water in the tank by coupling directly to your relay valve. It will fit tanks with a depth of between 27" and 34". The most common use for this would be a water softener (water conditioner) tank.

Econo-Tank Gauge aids in the accurate monitoring of stored water tank levels by combining a direct reading glass gauge mounted on a solid brass bracket with an overflow valve. The overflow valve allows water to flow freely into the tank. This product can be used for storage tanks up to 15 000 gallon capacity because of the low 1/2-inch NPT fitting on the side of the gauge.

Scaled for 3" diameter tanks, this lightweight gauge makes tank gauge readings fast and easy, due to its digital display and patented one-button Auto Shutoff Technology. Once the float is positioned, the ON/OFF button will automatically turn on the meter (and allow programming) in just five seconds. It's even equipped with a low-battery indicator and auto shutoff after 20 minutes to save on battery use.