Johnson Controls P100CC-9C Pressure Switch, SPST, Auto, Threaded

ENCAPSUL PRESSURE CONTROL;

The ENCAPSUL PRESSURE CONTROL with a corrosion-resistant diaphragm, flex bellows and rugged contacts, is designed to protect valuable equipment from pump cavitation damage due to high inlet pressures. Three models are available in copper, bronze and brass construction.

our half-hour rated P100CC-9C pressure control has the necessary plumbing connections to allow you to use it in many applications; NATURAL, PSI;

This pressure control has a 100 PSI direct acting spring with an O-ring and silicone washer, and 18" (45.7 cm) wire leads for ease of use, and it has a plastic enclosure with a clear dial face indicator.

This pressure control is designed for use with heating, air conditioning and refrigeration systems. The pressure control senses the difference between atmospheric pressure and the back-pressure created in an air tight system. The sensing element senses less than one inch of water column differential, i.e., less than 6 psi.

A pressure control that senses pressure on the supply side of the circuit and varies output to maintain constant pressure.

The P100CC-9C from Johnson Controls is a pressure control designed for use with vapor recovery systems in many commercial, industrial and institutional applications. The NEMA 4X explosion proof constructed enclosures are made from corrosion resistant steel and meet the latest ANSI/ISA 12.12.01 standard to ensure safety in hazardous locations.

The P100CC-9C is a Johnson Controls engineered pressure control designed to provide steady or delayed start protection for rooftop units. The controls are actuated by the rise of system pressure. The controls are soldered directly to the outlet, utilizing copper wire lead frames at exposed terminals to make make removal for field service simple.

Pressure regulator for selecting the proper flow rate to suit the application. Drip-free operation is assured by constant adjustment of pressure.

The LP9C 100 PSI Pressure Switch automatically turns on a compressor when a positive pressure is present. It has a maximum working pressure of 225 PSI and can be used in refrigeration applications.

Pressure switches control the operation of various types of equipment by sensing air, steam, or other process pressures and switching on and off an electrical circuit accordingly. When switching between pressure levels, they respond like a two-way contact: they either stay closed or open based on the sensed pressure. Switching based on pressure is used to avoid leakage through automatic valves; temperature changes cause most thermally operated valves to operate below set point.

The P100C Pressure Switches are designed to operate as ON or OFF controls for solenoid valves or as manual controls. Depending on the setting, they operate as pressure switches, as level controllers, as differential pressure controllers, as pneumatic positioners, as throttling valves and as valve-on indicators. These DPDT switches may be used with DPHB air cylinders or with double-acting cylinders. The unique design of these switches allows them to perform a double-acting function when placed between a positive and negative air source

The P100CC-9C is a self-contained pressure switch, designed for use with a variety of Johnson Controls encapsulated single and double diaphragm(s) compressors. The low sound level operation of the encapsulated compressor allows this pressure switch to be used in a broader range of applications compared to traditional dual set point switches. The DCI