Schneider Electric {Erie} AG13A020 AG13A020 24V ON/OFF 2 POSITION SPRING RETURN

24V ON/OFF 2 POSITION SPRING RETURN

The 24V ON/OFF 2 POSITION SPRING RETURN SPST is a very popular product in our HOME PRO line. The AG13A020 switch is rated to carry up to 4 Amps, 125VAC. It has a spring return and normally open contacts. Its snap-in terminals make it easy to install, and ensure a lasting connection for years to come.

The Schneider Electric {Erie} AG13A020 AG13A020 24V ON/OFF 2 POSITION SPRING RETURN is a toggle switch used for light and domestic applications. This has an Electrical Controls type and Sub-Type of Toggle Switch. This means that this is a On - Off toggle switch, with 2 Pole positions similar to 2327 , only for non-load carrying applications.

Schneider Electric ERIE AG13A020 24V DC on/off 2-position spring return actuator switch is easier to operate than a metal lever, comparable to the original equipment in terms of performance.

The AG13A020 is a 24V DC On/Off switch with 2-position spring return contacts to limit the wiring and control circuit. Each switch contains a built-in overtravel stop and a wire actuated lever for safety. This general purpose contactor can be used in a variety of applications to turn power on and off, including: fan controls, air conditioners, heaters, heat lamp controls, window-shade controls and any other low voltage device that requires two switching positions

The Schneider Electric {Erie} AG13A020 is a spring return, 2-position switch that works with 24V AC applications. This switch's 24V operating voltage makes it ideal for use in many lighting installations where the lamp or fixture will be switched on and off as part of normal operation. The spring return mechanism moves the switch to its off ("up") position after both poles have been closed. (meets Digi-Key specifications)

The AG13A020 is a combination ON/OFF two position switch. The spring return feature allows the part to be easily removed from the actuator. The part is easy to use by installing on the designated actuator and measuring the operating force required.

This switch is a manual, 2-position, 24V DC ON/OFF SPST actuator. It is rated 10A @ 24VDC maximum current, and has a standard blue Smith-Corona Actuator Switches, B737-1A22-U Series 250 lb. (113 kg) torque limit. The mounting frame is rigid 1/8" thick black plastic. The handle latch is spring loaded for quick disconnect with keyholes for lock and key for positive locking