ROBERTSHAW ETC-112000 ETC-112000 24V SINGLE STAGE COMMERCIAL TEMP. C

24V SINGLE STAGE COMMERCIAL TEMP. C

Robertshaw ETC-112000 ETC-112000 24V SINGLE STAGE COMMERCIAL TEMP. C

The ETC-112000 24V SINGLE STAGE COMMERCIAL TEMP. C by ROBERTSHAW is a single stage thermostat that has 4 wires for ease-of-installation and direct replacement to many other single stage commercial/retail models. The ETC-112000 24V SINGLE STAGE COMMERCIAL TEMP. C can be used for water filtration, water heaters, swimming pool equipment, refrigerators, beverage coolers, freezers, washer dryers, and electrical controls.

The 1.5 HP/1.3 kW ETC-112000 24V SINGLE STAGE COMMERCIAL TEMP. C is a 115-120/230-240 VAC single stage scroll compressor designed for comfort air conditioning and process cooling applications. It is equipped with a keyed VSD drive and pressure switch with integral internal control access, which provides direct contact (local action) modulating control of the compressor discharge pressure for optimum controllability, reliability, and ease of operation.

Product Description The ETCHELLS® 24V SINGLE STAGE COMMERCIAL TEMP™ thermostatic control is a microprocessor-based control that can be used with low voltage heating elements to maintain a desired temperature. Each ETC is equipped with a replaceable, non-fusible pressure switch that will trip at the selected temperature to protect the heating element from damage. Two wire design with plug-in connections and 3/8" output shaft. Waterproof, thermal overload protection and adjustable set point.

This single stage Commercial Temperature Controller is perfect for protecting refrigeration appliances and monitoring purity in lab processes. A pleated towel wick is used to siphon liquid from within the tank to a saturation reservoir, preventing freezing of the output line and simplifying the filling process. The ETC controller can be set to automatically restart the process when it reaches temperature setpoint, when power fails, or when the saturated wick becomes dry.

The ETC-112000 is specifically engineered for on-demand water heating using "Hot Only" water to provide and maintain a high volume of heated water in a short period of time. It features a cast iron heat exchanger, 1 inch PEX stainless steel conduit and thimble, steel domes and brass strainers for long life and durability. This unit is designed for CAC type units with 42 amp or less input circuits

This is for the two stage mini split systems that use an ETC-112000 as there are different sized compressors for different size systems. This one is a 1,200w system and uses a 3 ply aluminum fin on the outdoor unit. In order to fully replace the compressor you must also buy the condensers that go with this outside unit and you will have to figure out what R22 unit you have so then you can find the right size. You will also need to convert it to R410a refrigerant (we suggest buying about 10lbs of refrigerant to be able to rebuild it correctly) and