ROBERTSHAW ETC-212000 ETC-212000 24V SPDT TWO STAGE COMMERCIAL ELECT

24V SPDT TWO STAGE COMMERCIAL ELECT

The dimensions on this product are 8"H x 1"W x 3 3/4"D

Can Be Used As A Normally Open Or Normally Closed Control

25 Amp at 250 VAC, 1/2 HP at 125 VAC, NEMA 1 Enclosure, IP67/NEMA 4X

The Robertshaw ()

This switch is used to automatically control an air operated diaphragm pump

Termination: Screw terminals with cover

Thank you for requesting information on the Robertshaw 18180 Invensys ()

This durable and reliable air switch is a cost effective alternative to traditional sensing methods

Spdt air sensing pwr switch with adjustable air sensing to control air motor loads such as exhaust fans, bathroom ventilators and kitchen hoods

7 to 1

This is a new in the box and unused Air Switch that has a Coil Resistance of

wc by loosening the adjusting screws

PRODUCT ID: ROBERTSHAW 18180 INVENSY ()

25"-1"WC and has a SPDT (Double Pole Double Throw) configuration with adjustable sensitivity to handle high and low pressure applications

0 ohms at 10-95% RH

This is an AFTERMARKET part, not made by Invensys - it is designed to fit any Robertshaw (or other) control board that accepts 18180 switches

This product is a SPDT Air Sensing Switch with adjustable cutout

25-1"WC SPDT AIR Switch

25-1"WC SPDT Air Switch Is A Dual-Purpose Switch

The Robertshaw 18180 Invensys ()

Robertshaw 18180 Invensys ()

This air switch is designed for use as either a normally closed or normally open air switch and will operate in the following temperature ranges: Pressure Sensing ?40 to 175 psi (2

The switch uses a

25"- 1" WC Inverted Air Vessel with a built in flow control (Model 18181)

7 to 12

It is not to be used with water or any other fluids - only air! This switch allows the operator to regulate the air volume required to activate the switch

5 bar) and Airflow Sensing ?40 to 27 psi (2

8 bar)

This Air Switch Will Shut Off At 1/4 Inch Wc For Normally Open And 1/2 Inch Wc for Normally Closed

The INVENsys Robertshaw 18180 is a SPDT adjustable air sensing switch

The 18180 is a three position air sensing switch with solenoid built in

The adjusting screw on the left side can be used to set the velocity of the flow through the switch, while that on the right side can be used to sense when there is no flow through the switch

These compact, low-cost sensing switches can be installed quickly and easily

The Robertshaw 18180 features a 10A at 250VAC

Invensys () / Robertshaw 18180 Series Air Sensing Switches are designed for use on air compressors, air receivers, and other process equipment

This switch is

25 to 1

It also comes with a 25A durability rating and a 1/8 in NPT pipe connection

It controls the motor speed based on room temperature, which is sensed by a bimetal thermostat and delivered to the control, allowing more efficient operation of the cooling equipment

It also has an Adjustable airflow from 0 to 80 CFM, and comes with instructions

The 18180 is an adjustable air sensing switch which can be set to 1/8, 1/4 and 3/8 in

25-1"WC SPDT AIR Switch is a great addition to your HVAC system, ensuring that your home or work environment stays at the temperature you need it to

The product is designed by Robertshaw and has a temperature range of 40F to 115F, pressure ranges of 10-150psi and voltage ranges on AC/DC are 110V and 220V

Ratings:

The Position Of The Knob On The Air Switch Determines If Pressure Is Required To Activate The Double Throw Or Not

The long lever acts as the sensing portion of the switch and can be adjusted accordingly