Johnson Controls 316816 1" NPT Liquid Level Flow Switch wit

1" NPT Liquid Level Flow Switch wit

This 1" NPT Liquid Level Flow Switch with Composite Housing from Johnson Controls is intended for use in food and beverage processing equipment. It offers intelligence enhanced protection against costly downtime and maintenance costs. It ensures early detection of possible leaks and can be set to force a shutdown if a leak or obstruction is detected. The switch utilizes composite construction that offers reliable and non-corrosive installation, and has a sensitivity rating of 16 to 33 mL/min (0.5 to 1.1 GPH).

Johnson Controls 316816 1" NPT Liquid Level Flow Switch with Internal 20 Amp NPT-threaded 10,000 RPM Motor Speed Controller in Plastic Enclosure

The Liquid Level Flow Switch with 1" NPT is a fully submersible flow switch designed to float with the tube or pipe. The housing for this unit is molded from high-impact Acetal, and is rated for use with water, condensate, acids, dilute alkalies, and most organic liquids. This switch meets the demands of many applications found in both commercial and residential markets.

The Johnson Controls 1"-NPT Liquid Level Flow Switch with 1/4" Process Signal Port should be used in applications where a signal port is required to allow for process isolation. The control may be set to the desired switch point and then set up to send an analog or digital signal to other components within the instrumentation system for process monitoring.

The Flow Switch for 1" -14 NPT liquids. 316816 is durable model with stainless steel construction, vertical float, adjustable Poppet, vertical clearances acceptable for high temperatures, and ball check. For gas or liquid process monitoring to shut down equipment during service or to monitor plant safety.

Our liquid level flow switch is designed for the harshest, unplumbed environments. With rugged all weather construction, these switches will function properly despite dust or dirt contamination, or immersion in liquids.

Flow Switch, Liquid Level, Series: 316816, Body Styles: Panel Mount/Panel Mounting Type: Screw Flanged, Number of Ports: 1, Pipe Size (Inches): 1/2 - 14 NPT, Process Connection Type: NPT or BSPT Go to top of page

Our liquid level flow switch monitors the water level in heating, air conditioning, and cooling systems.

The Johnson Controls 2810A2B Liquid Level Flow Switch provides accurate rate of flow measurement by integrating the physical sensor into an electronic flow switch. An integrated dual-probe design measuring both level and differential pressure allows the user to pick the right switch for their application. With small dimensions, high accuracy, and an optimized configuration within compact enclosures this switch can fulfill the requirements of most demanding applications like clean water systems, chemical industries, heating oil stations or other gas stations. It is converted to other custom designs based on different application.

This liquid level flow switch is suitable for liquids such as water, oil and gas. It can be used to control a pump or other equipment and provides over flow protection. A common application is the control of a boiler feed water pump from a tank, from which water is gravity fed into the boiler. The device shuts off the boiler feed pump when the supply of water from the tank is exhausted.

The Johnson Controls Liquid Level Switch is a non-fluctuating pilot signal pilot signal pilot signal pilot signal pilot signal pilot st

C.A.T.S. is a revolutionary, microprocessor based Liquid Level Monitor that monitors the level of liquid in a vessel, tank or any storage tank or vessel, providing an output signal to switch equipment on or off depending on the liquid's level within the vessel.