FASCO D0746 Fasco- 1/12HP 115V 1550RPM MOTOR

1/12HP 115V 1550RPM MOTOR

Fasco D0746 Fasco- 1/12HP 115V 1550RPM MOTOR

FASCO 1/12HP 115V 1550RPM MOTOR D0746 --- FASCO motors were designed for comfort cooling AC systems. The FASCO 2-Speed control is recommended for use with this motor. Different size motors are designed to run on different size compressors. Always refer to the compressor nameplate for the correct motor horsepower requirement.

This 1/12HP 115V 1550 RPM MOTOR from the FASCO BLOWER series is an air moving device that converts electrical energy into kinetic energy. It can operate a variety of tools such as a scroll saw, dust collector or belt sander.

The Fasco D0746 1/12HP 115V 1550RPM Motor is commonly used in low watt applications such as ventilation fans and blowers. A 115VAC input powers this motor, while the 1/12 rating means that the maximum horsepower output is 0.75, and the maximum rpm is 1550. This high quality motor is constructed with a cast aluminum for long term durability, and uses a thermally protected ODP ball bearing that provides up to 12.0 service factor at 115VAC. The Fasco D0746 1/12HP 115V 1550RPM Motor meets applicable government

The FASCO D0746 Fasco- 1/12HP 115V 1550RPM Motor has a maximum continuous output power of 12000W and a maximum starting current of 80A. The starter is a DC type. It has a frame type fan. The type of the armature is squirrel cage. This motor is UL, CSA Listed. It contains carbon brushes in its design and it should be replaced after every three months. This motor comes with thermal overload protection.

The Fasco 1/12HP 115V 1550RPM Motor is a switch-start, permanent split capacitor (PSC) motor that delivers 1/8 horsepower at 115 volts. A cast aluminum ventilating fan protects cylinders and motors with two aluminum louvers below the motor compartment to expel heat.

The Fasco D0746 is a 1/12HP 115V 1550RPM motor with a bolt on frame mount and a 1-1/8" shaft. It has a power factor of .91, an efficiency of 92% and weighs 7 lbs.