FASCO D1194 MTR 3.3" DIA 1/25HP 1SPD Fasco-

MTR 3.3" DIA 1/25HP 1SPD

The FASCO D1194 MTR 3.3" DIA 1/25HP 1SPD is a fan with an efficiency of up to 82%. The FASCO D1194 MTR 3.3" DIA 1/25HP 1SPD is a thermal relief and terminal box for use in the holes of a steel angle-type box. It should be used with steel angle-type boxes with listed flanges.

FASCO D1194 MTR 3.3" DIA 1/25HP 1SPD 220V Fasco Dust Collectors were designed for high efficiency and performance with their heavy duty mechanism and powerful motor. Each model has been specifically designed to reduce operating noise, provide a clean air supply, and easily mount to any combination of carts or structure.

The MTR mini turbine fan is a 1/25 HP and works with a 208 volt electrical system. It has a diameter of 3.3". This air moving unit features a forward reverse. There are 0.56 amps at 208 volts and 3,600 RPMs. The motor is partially field-reversible. The MTR fan is 2" deep, 1" high, and 8" long and weighs 13 lbs.. This drum fan is made in the USA and is protected by a limited 1 year motor warranty, 7 year mechanical warranty, and a 1 year finish warranty for repairs not requiring replacement of the unit.

Our FASCO D1194 industrial ball bearing coolant fan is 1 phase, 3.3" DIA, 1/25 horsepower for the cooling of equipment with approximate size dimensions of 41.34"(1016mm) X 17.75"(452mm) X 9.37"(238mm). The box is 4' x 4' x 3', (nominal design value) and it has an approximate cubic feet volume of 9.77 ft3 (0.28 m3).

The Fasco D1194 MTR is a 1/25 HP 1-Stage Air Compressor with the following features:

The MTR Series motor is designed to handle light grinding applications. The small size of the MTR Series is excellent for applications in tight spaces. These single-speed motors are built with a high quality cast iron construction and offset mounting capability.

Our economical MTR series of air-cooled, permanently lubricated, two speed motors are ideal for light loads in small air handling units and commercial ventilation systems.