Field Controls 46086400 "SafetySwitchM/R "SafetySwitchM/R

"SafetySwitchM/R

"SafetySwitchM/R" is designed to connect "SafetySwitchM/R",included in the package, with a wire to the electric supply line. This switch can be used to provide power for the remote controlled equipment and to control it safely.

The "SafetySwitchM/R" is a safety switch located on the "floor" of the mower to indicate when a person is in close proximity to the cutter bar making the machine inoperable.

"SafetySwitchM/R products are UL-listed high-voltage safety switches used to monitor and control electric loads. They can be installed on branch circuits and switchgear to ensure the safe operation of equipment. When used in an "OFF" position, they prevent power from flowing to equipment until the circuit is re-energized.

The Field Controls "SafetySwitchM/R" consists of an air switch, 120 VAC receptacle in a plastic housing with rubber-covered, quick-disconnect terminals.

The Field Controls "SafetySwitchM/R is a locking, single pole double throw switch for gas shutdown or electric auxiliary (booster) circuits. It may be used as a safety interlock with other equipment, or as a switch to enable local operation of the system.

The SafetySwitchM/R is a simple plug-in, field-installable, pilot-wire actuated safety device that meets the requirements for the Occupational Safety and Health Administration's (OSHA) 29 CFR 1910.147(a)(1) & (2), 2002 edition, air brake system standard. The unit is a thermal-magnetic ­type and provides protection against inadvertent operation of the air brake control system.

This switch is used to sense the presence of a machine. It will be de-energized if the machine is present and energized if the machine is not present indicating that the operator has not properly engaged the controls. This "ON-OFF" switch allows for multiple control start options, i.e. a safety switch or push button. It offers a momentary contact closure or 2 non-momentary type closures commonly used as a safety interlock switch.