RHEEM
RHEEM 185607 /Protech - Conversion Kit - /Ruud/Protech - A complete
system for converting your Ruud furnace to a Protec system This is a conversion kit for converting your Ruud furnace to a Protec system.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountNAT-> LP CONVERSION KIT
The RUUD ProTech- NAT to LP Conversion Kit includes all the components necessary to convert your Rheem/Ruud natural gas furnace to operate on propane. The kit includes an LP Conversion valve assembly with manual reset, T and check assembly, all lines and fittings needed for conversion, plus a 3/4 inch by 30 feet LP line termination kit. Uses Rheem part number 185613 / Ruud part number 185613
The Protech/Ruud/Rheem 185613 Natural Gas Conversion Kit is designed for use with the Ruud / Rheem / Protech units. This kit is complete with a high efficiency Honeywell L80i-N Natural Gas Valve, and all other necessary components to convert the unit from Natural Gas to LP Gas.
RHEEM 185613 /Protech - Conversion Kit - /Ruud/Protech is a complete unit that includes conversion burner, LP fuel line, and hose fittings. It is packed with all the necessary parts to convert your residential gas unit over to work on LP fuel. This kit is for use with Ruud/Protech equipment ONLY - not manufacturer approved for use with any other brands of residential gas equipment.
This kit will convert a 185613 Rheem Ruud or Protech model condenser to LP. The kit includes; Heater assembly, Compressor, Relief valve, Receiver drier with sock, New LP hose and Manual.
The Rheem 185613 gas conversion kit is a complete unit that has all necessary parts to convert a natural gas -fired system into a liquid propane, butane or natural gas -fired heating system. It recommended for installation by a professional contractor only. For use with Rheem, Ruud and Protech models.
A complete conversion kit with everything you need to convert your natural gas furnace to a propane one. This kit comes with the new thermocouple and two new orifices needed to connect your existing furnace to the new conversion kit. Two orifices are included in case one is misplaced during conversion and not able to be used again. Also included is instructions on how to properly perform the conversion.
This Rheem conversion kit allows the homeowner to convert from Natural Gas to Propane without having to replace the entire unit. This kit can be used on many other brands which interlock with Ruud or ProTech models.