OTC OTC519067 HIGH QUALITY TOOLS & EQUIPMENT TOOL, FUEL LINE DISC. (5/16)

Fuel Line Disconnect 5/16"

The T-shaped handle features an internal magnet that holds the bearing cap in place, eliminating the need for screws or pins

The jaws are made of high quality steel and screws are made of heat treated alloy steel

This product is used to remove and complete disassembly of the pilot bearing on the crankshaft

This ½ inch hex shaft measures 4½ inches from tip to tip and is threaded 1/2 inch x 20 tpi

OTC OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws is used to pull the inner race of a bearing

Our OTC 4420 Pilot Bearing Pulling Attachment with 2 Pair of Jaws is a special tool developed for rapid, simple and inexpensive removal of both single and double row tapered roller bearings from tapered roller shafts, both internal and external

OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws is a new innovative product that comes with the review of our professional team to customer needs

Once the pilot bearing has been removed, an adaptor (sold separately) allows you to press in an OTC seal kit and repack the assembly with grease

The tool is available as a stand alone unit or in a kit with two pair Jaws, 10mm and 12

When your non-OEM, tapered-roller sleeve bearing is spinning on its outer race, but the inner race is stuck, it's time to get a grip

OTC-4420 pilot bearing pulling attachment with two pair jaws

The OTC-4420 Pilot Bearing Pulling Attachment is designed to pull and remove double tapered roller bearings from shafts

The tool is specially designed for two pair jaws to open large enough to grip tapered roller bearings with large outside diameter, such as 3" - 12" diameter, in high speed spindle bearings

It can also be used on bearings without keyways or aperture

It features two pair jaw functionality and a three-step telescoping handle for easy use

It includes two pair of jaws – one flat and one V-shaped – which are used to hold the bearings in place during removal

The OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws is designed for large, awkward and heavy pilot bearings

The pilot bearing puller features hard steel for durability with soft brass tips for reducing scratching of parts

This is a pilot bearing pulling attachment with two pairs of jaws, one front and one rear, that are used to pull bearings from shafts

7mm diameter shanks and multiple adapters

This handy attachment is used to pull, remove and disassemble a variety of bearing types

OTC OTC-4420 Pilot Bearing Pulling Attachment with Two Pair Jaws

It consists of a pilot bearing puller, two sets of jaws, an adapter sleeve and an adapter sleeve mounting screw

The OTC 4420 pilot bearing puller is designed to remove the inner and outer race of both tapered roller pilot bearings

It is used for pulling out both inner and outer bearings without any damage to the bearing or shaft

The OTC Pilot Bearing Puller has two pairs of serrated jaws that clamp down on the inner race to hold it while you apply pressure with the puller bar