Functional Devices PSMN40A24DS DC PWR SPLY ISOL 120VAC-24VDC

DC PWR SPLY ISOL 120VAC-24VDC

The Functional Devices PSMN40A24DS DC Power Supply isolates 120VAC from 24VDC.

New Functional Devices PSMN40A24DS DC PWR SPLY ISOL 120VAC-24VDC - is a product that you should keep in your mind.

Functional Device PSMN40A24DS is a power supply isolator. It has a voltage rating of 120 VAC and a current rating of 24 VDC. It is designed to meet UL and CSA safety standards. This product will separate the DC power from the AC power to prevent damage to sensitive electronics that could be caused by transient surges in the incoming AC power line. This device must be installed in an enclosure suitable for use with this device.

Neuco Inc. has created a series of Functional Devices to help consumers get the most out of their electronics. Each device has a specific function and is designed to make your life easier. The DC Power Supply Isolator allows you to tap into the energy in your car's 12-volt battery so you can run all kinds of equipment on a 120-volt power source.

Neuco Inc. PSMN40A24DS DC PWR SPLY ISOL 120VAC-24VDC is a power supply isolator that comes with a 24VDC output and 120VAC input. It is small in size, which makes it easy to use. Its features include fast start-up and recovery, reverse polarity protection, short circuit protection, overload protection and overvoltage protection.

The Functional Devices PSMN40A24DS DC Power Supply provides a low dropout voltage of 300 mV at full load current and an output ripple of less than 100 mV peak-to-peak. They are designed to operate in a wide range of environments including automotive, aerospace and military applications. The units are available in eight standard configurations with no minimum order quantity.

Neuco Inc. is a company that manufactures and supplies various types of functional devices for the electronics industry. The PSMN40A24DS is a power supply isolation module that converts 120VAC to 24VDC and includes four DC power outputs, each rated at 2.5A continuous. This product is suitable for use in a variety of applications including industrial, medical, test & measurement, automation, telecommunications, military and aerospace.

This is a DC power supply for the Neuco products listed below.

These functional devices are used to protect and/or control circuits by manually isolating them when power is not applied. The devices can be made in various voltage, current, and isolation configurations to fit your specific needs.

This device is a power supply isolator that allows you to connect a load up to 24VDC. The output voltage is adjustable between 5VDC and 24VDC with a factory setting of 12VDC.