Functional Devices RIB2421C ENCLOSED RELAY 24VAC/VDC 120/277VAC 10 AMP SPDT

24VAC/DC

The Function Devices RIB2421C enclosed relay is 24VAC/DC and rated for 10 Amp at 120 or 277VAC 1 phase. The relay is SPDT and has a 0.1 seconds delay time between break contact and make contact. It is also available in other Amps: 5 Amp, 15 Amp, 20 Amp, 30 Amp, 80 Amp.

The ENCLOSED RELAY is a 24VDC, 10 AMP SPDT relay that can be used for control of any load up to 120VAC with voltage applied. The relay is enclosed in an aluminum enclosure and has a 3.5mm locking connector, green LED power indicator and a coil voltage rating of 12VAC/DC at 1/2.8A.

The RD2421C is a 'small form factor' relay that features SPDT relay contacts rated at 10 Amps AC/DC and 120/277 VAC. With dimensions of 2.95" H x 2.95" W, this DIN rail mounted relay has a non-latching design with a current range of 5 to 200 mA DC. The low on-state resistance allows the RD2421C to handle inductive loads. This device includes mounting hardware and an LED power indicator

Ribbon bus technology, Features: Enclosed relay, Form A (standard) Sppdt (single pole, single throw), Number of poles 2, Voltage 120AC/277AC VAC , Voltage 24VDC, 120VAC 10Amp SPDT Infrared remote cutout included, Connectors included are 20 pin male and female Deutsch DTM connectors, UL recognized part. Housing is flame retardant thermoset material with high voltage ports enclosed and insulated.

The RIB2421C relay has a compact housing size that provides space saving advantages for equipment designers. The device features current limiting contacts, a voltage rating of 277 VAC at 10 A, a switching capacity of 48 VDC at 3 A and a terminal board with connectors for easy wiring.

The RIB2421C is a Special Purpose Relay contained in a rugged industrial grade weatherproof enclosure. This relay is an ideal choice for use in harsh commercial environments It has an operating temperature range of -40° C to 125° C (-40° F to 257° F) and is UL, CSA rated, IP65, NEMA 3R rated.

The RIB's (Relay in a Box) are the latest in relay technology. Unlike our previous generation products, the integrated microprocessor provides protection against overcurrent, overvoltage and short circuits. The following contigurations are available: Normally Open (NO), Normally Closed (NC), Changeover, SPDT, DPDT and 4PDT. The RIB's can control loads up to 10 Amps at 120VAC or 277VAC (ONLY).