Functional Devices TR100VA002 120-24V 100VA Xfrmr 120-24V 100VA Xfrmr

120-24V 100VA Xfrmr

TR100VA002 120-24V 100VA Xfrmr

The Function Devices TR100VA002 120-24V 100VA Xfrmr 120-24V 100VA Xfrmr is a power supply designed to deliver and control 120VDC to 2400W of power for whole system areas or circuits. It comes standard with either an open chassis or cover that has a port quantity of two, a -48VDC output that provides 0.1A as referenced from a 100mVrms input signal, an output voltage regulation from 0% to 20%, and more.

Whether you're looking to power up a small alarm system or electronics for a construction project, you can count on the 100VA Xfrmr from Functional Devices. It has a smaller case size than many other models, so it's easy to take on the go and can be installed using an in-line fuse breaker for safety. The thermal protection prevents damage to the device should there be overcurrent, and the 100 VA capacity provides ample power to run your devices.

The ultra-compact TR 100 VA power transformer provides 120V 100 VA AC via a standard IEC C14 AC input connector, to a single output connector with a 5.5 mm diameter positive center pin. The unit is capable of operating at 120V or 240V in the range 100 to 240 VAC and can be connected to devices rated for 24 or 48 VDC, 120 or 230 VAC.

The TR100VA002 Xfmr is a compact, lightweight, unipolar step-down AC/DC converter. This unit has been specifically designed to be used in conjunction with an inverter. Its compact format allows installation flexibility and reduced weight when compared to traditional power supplies.

The portable TR 100/100C Series is a high performance, solid state, compact Toroidal transformer specifically designed for use in medical and industrial applications. It is designed to operate on 120-volt single-phase or 208-V 3-phase and 240- volt single-phase or 277 V 3- phase input power.

Switch mode DC/DC battery voltage converter. Inputs: 120-VAC, 60Hz, 2.0A; 24VDC 11.5 - 13.0VDC at 400mA.