GC Valves S211GF02N5GJ2 1-1/4^ 120V SOLENOID VALVE N.C.

"1 1/4"" NC 200PSI KONAN VALVE"

This 1 1/4"" N.C. SOLENOID VALVE is used on water heater, commercial hot water heating system. This NC valve has modular structure, is made of surface mounted technology using high temperature plastic as main materials with good corrosion protection and abrasion resistance, etc.

Master the power of a clean restroom with the Konan S211GF02N5GJ2 1-1/4" N.C. solenoid valve. The N.C. action means that it switches from closed to open when current is sent through the coil, and visa versa when current stops flowing through the coil. Use this product for multiple applications like rerouteing lines or providing water pressure to a pump or device attached to a vessel.

Our S211-GF02N5GJ2 Solenoid Valve has a static pressure of 200 psi and an operating temperature of 21º- 164º F. KONAN Industries' valves are serviceable, interchangeable and will stand up to the most rigorous applications. Our S211-GF02N5GJ2 Solenoid Valve is designed for low flow applications.<

The GC Valves S211GF02N5GJ2 1-1/4^ 120V SOLENOID VALVE N.C. features a maximum pressure of 200 psi. With a body style of Ball and Plug, this product is designed for through flow applications. It is made up of Nylon. Also referenced as GFS30GBALVAL+SDC. This product has a solid brass bonnet, stem, seats, and shank unless otherwise specified in the title block of the product page.

The GC Valves S211GF02N5GJ2 Solenoid Valve N.C. comes with a 1-1/4"" (32mm) NPT inlet and outlet, a 1-1/4"" (32mm) orifice with a seating pressure of 200psi (12bar), and provided with 1 1/4"" (32mm) DIN flange mount, or mounting ears for flexible installation options. Tested to 120VAC at 50hz and a continuous duty rating of 200psi (12bar). This solenoid valve is suitable for use with general

The 1-1/4" N.C. Solenoid Valves are designed for dual or single line advance action and are designed to conform to the following: 2014 Uniform Plumbing Code – UPC 2009, ASME A112.18 Hydrostatic Testing Requirements – Annex F and Factory Mutual Research Report File Number 58-3-04-01 in accordance with NFPA 99 Requirements for Electric Water Heater.

The GCValves S211GF02N5GJ2 is a Solenoid Valve with Handle operated, 1" NPT straight through flow, 200 PSIG. The product is designed for use in commercial and industrial water pressure applications. With a suction at or above 34" WC the valve will operate fully open. The gate type body allows the body to remain in position even if the actuator fails. For short-term pressure relief, up to 2500 psig (167 bar), the actuator must be held closed.