GC Valves S211GH02T2FG9 SOLENOID VALVE 1" NPT 2-way, Normally Closed, 120V/60Hz

"1""N/C 120V 10/150#STEAM VALVE"

The GC Valves S211GH02T2FG9 Solenoid Valve controls the flow of steam through a piping system. This 2-way Normally Closed solenoid valve is rated at 120V and has a 10-150# Steam and 150# water operating pressure. It has 1"" NPT ports with a 0.315"" orifice.

Solenoid 1" NPT 2-way, Normally Closed, 120V/60Hz steam valve. Primary seat material is PTFE with a minimum seal force of 10#. Steam flow is 150#. Inlet connection diameter is 1"NPT and outlet connection diameter is 1-1/2"NPT. ---------------------------------------------------

Two-way, Normally Closed (N/C), 120V, 2-way, Normally Closed (N/C), 120V, 1" nominal diameter, normally closed solenoid valve designed to be used with the Tritex or Grandis range of gas-fired central heating boiler systems. Valve is normally closed."

The 1"NPT 2-Way Normally Closed 120V Solenoid Valve maintains the majority of commercial and industrial heating and Steam applications. When energized, electrical current energizes a plunger in the coil spring to open the valve. When power is removed from the coil, the plunger swings back into its normal position and closes off the flow. For use with hot water, steam, air, and other gasses where there are systems with different pressure levels or temperatures.

VALVE, SOLENOID; Series:S212; Voltage Rating:120VAC; 1"NPT Port Size; 0.5~0.01GPM Flow @ 0.25HZ; 2-WAY Normally Closed Operation, Inlet Pressure 1.0 PSI to 7.0 PSI, Outlet Pressure 0.4 PSI to 0.8 PSI for WaterFlow Direction; 3/8"" NPT Connections; Body Material:Steel

Our SOLENOID VALVE, 1"NPT 2-way Normally Closed, 120V/60Hz product is a trusted choice for customers who demand the best. It is manufactured in compliance with strict standards of quality and reliability by GC Valves. We are always here to help your business succeed with quality parts, exceptional service and professional expertise.

The S211GH02T2FG9 is a normally closed, 2-way, 1" NPT steam valve. It features an extended actuator and diaphragm that is typically suited for low to mid-temperature applications. The actuator has a minimum servo travel of 0.5" but the actuator travel will increase with load and temperature. The solenoid coil is positioned vertically above the valve body for maximum air flow. Installation requires 1/4"-20 mounting bolt located in center of valve for mounting at point-of-use or to a panel utilizing the gland nut.