Carrier 298172 HC39GE471 460V 1100RPM 1/3HP MTR

460V 1100RPM 1/3HP MTR

The carrier 298172 HC39GE471 460V 1100RPM 1/3HP MTR is the part of the commercial transmission and distribution products group, which combines highly engineered commercial gears, motors and controls in a unique package. Our products help to control and distribute power reliably and efficiently in C&D applications.

The Carrier 298172 HC39GE471 460V 1100RPM 1/3HP MTR is engineered with components tested to 21 performance specifications, 21 performance tests and more than 20 limits of performance. It features a cast iron, enclosed, water-cooled sleeve bearing operating at 460 RPM. The rotor assembly is ball-burnished for maximum contact between the races and the balls, resulting in minimal noise and wear. The shaft seal is fabricated of an epoxy material that will not allow moisture into the motor while providing a means for it to escape. This motor also meets or exceeds the NEMA standard of A1 for

The Carrier HC39GE471 460V 1100RPM 1/3 HP Motor is designed for use in upflow furnaces. The motor can run at a temperature ranging between -40 to 240 degrees Fahrenheit, and has an operating voltage of 115–Nominal at 460 Volts. The power factor of the motor is 0.7.

The Carrier 298172 HC39GE471 is a direct drive 1/3 horsepower mechanical fan that comes with a 5 model heat exchanger. Its 50Hz speed is designed to work best in heating and air conditioning systems.

The Carrier 298172 HC39GE471 Motor is ideal for numerous ventilation and heating jobs in your home, allowing you to customize the comfort of each room. The blower features a single-speed control and integrated thermal overload protection. A 9/16" C-section shaft and 1/3 HP permanent split capacitor motor add versatility to this unit, allowing it to operate with a variety of different fans.

A two-speed, reversible motor, high torque and low amp draw mean even high starting torque power. The redesigned fan blade design reduces distortion for quieter operation while providing maximum airflow. Features include a 1/3 horsepower induction motor that delivers 1,350 RPM to 3,950 CFM through six sizes of inverter equipped Airfoil Controllers. Heavy duty 115 volt motor is permanently lubricated and pre-wired for 230 volts. Not available in AK, HI or Canada

Designed specifically to work with Carrier and other select carrier furnace and air conditioning products, the CMP39-1P comes with a 4-lamp parallel light string, as well as a pair of high-lift M19 channel-positioned breaker/fusible switches. Major brand duct blower compatible