Carrier 300511 HD46AE123 3/4hp 120/240v1ph Motor

MOTOR BLOWER 3/4 HP EON

The Carrier 300511 3/4 hp EON fan-forced furnace turns your existing duct system into an energy-efficient HVAC system. With comfortable supplemental heat, this ruggedly built, high-quality direct-drive unit provides quiet, reliable performance through intermittent use by attaching to your thermostat.

Simply put: it's a blower. It moves air. Not bad, huh? But there's more to this blower motor than meets the eye. In fact, it has a lot in common with other MOTOR brand products. First off, it's super quiet at just 45 dbs—so it won't interrupt your outdoor conversations or keep you up at night. Second, it requires very little maintenance: all you have to do is change the air filter every year or so, and clean out any debris that might accumulate inside the housing once a month. And finally, it's engineered for low-speed operation

The Carrier HD46AE-123 is a 3/4 HP motor blower; the motor operates with either 110 to 120 or 220 to 240 volt single phase input. This motor is certified for use with the Carrier Infinity indoor air quality product line.

The Carrier 300511 HD46AE123 3/4 hp 120/ 240v 1ph Motor is a replacement for certain models of Carrier heat pumps. The motor is secured to the inside of the unit with the provided screws. Motor capacitor is included.

This motor will change the performance of your blower unit.

The Carrier® brand blower is manufactured to produce the highest volume of air for a wide variety of comfort control applications. The blower is available as a sealed or non-sealed motor and with a head (chamber) size of 56", 66" or 78". Its 4-bolt mounting configuration allows for easy replacement of the blower and increased durability.

A unit with an aerodynamic housing, highly durable impeller and series free bearings. The positively aligned motor is pre-wired for 115V, 230V or 460V operation. The motor can be bonded to the duct using aluminum rivets (included). This motor is for use in a system with a heating auxiliary voltage of 208 volts or less. For dryer venting, it is recommended that the optional Series Free Lint Filter duct be used. (4" core). Includes Blower Motor Only. Heat Gun not included .