Johnson Controls 57099 HUMIDITY TRNSMTR WALL MT HUMIDITY

HUMIDITY TRNSMTR WALL MT; HUMIDITY

The Johnson Controls 57099 Humidity Transmitter Wall Mount is Humidity Sensing designed for use with humidifiers or dehumidifiers. This transmitter features a range of 40 to 90%RH and features a RH LCD Display On/Off Button On/Auto/Off options. The high-quality plastic used in this product makes it suitable for indoor and outdoor use, specifically in commercial building applications.

The CorTemp 57099 is a wall-mount humidity transmitter housed in a metal case. With input voltage of 18-25 VDC, it features analog signal output monitored with an LED indicator. This transmitter is configured with one universal connector, which is suitable for most humidifier / dehumidifier systems.

From the Johnson Controls Humidity Transmitter family, this is the 57099. This sensor, fairly new to the market, transmits humidity data readings to a monitoring device at a frequency of 900Hz. Some of it's features include: 1,024 Memory Locations; Error Outputs; Digital Data Output.

The 57099 Humidity Transmitter is an easy-to-install model used to control an exhaust fan based on temperature and humidity. The 57099 works with any comfort system that utilizes a return air temperature sensor, such as the 21009, 37810, 30330, and 37269 series.

The Johnson Controls 57099 Humidity Transmitter gives you the ability to read the humidity inside your HVAC duct work. The transmitter transmits 1-Wire bus data to the matching 1-Wire receiver. This remote humidity sensor features an outside temperature compensation, resistive outputs that operate at 24 VDC, and an LED display that shows min/max/proportional humidity, min/max temperature, and status information.

Control Humidity In Small Commercial Spaces With The Johnson Controls 57099 Humidity Transmitter. This Small, Inexpensive Valve Works In Conjunction With A Temperature Sensor To Eliminate Condensation And Increase Product Life Cycle.

Johnson Controls humidity transmitter transmits a signal with a 30 ft. cord from the sensor to a controller or humidistat indoors. Delivers a -40°C (-40°F) to 80°C (176°F) output signal which is compatible with most controllers and humidistats having a -40°C (-40°F) to 120°C (248°F) input. Calibration certificate, 5'cord, and 2-pin plug included.

For an outdoor installation, the electronic control is mounted in an enclosure with a NEMA 4X rated base. A cable is run through conduit to the location where the outside sensor is mounted. The outside sensor cable connects to the HCM inside enclosure with a cable gland rated per UL 486. For further outdoor protection, enclosures are sealed with silicone RTV adhesive plus appropriate gaskets, hardware is stainless steel, and terminal connections are tin-plated copper - 100% lead free.

Aircuity is a standard solution for a broad range of residential and light commercial applications. The Aircuity family now supports multiple end-users with three size formats (single, double and triple output models), seven design options (including fully ducted systems) and ten operating modes (including user-configurable EconoMode). Maximum flexibility through extensive range of accessories allows for integration with any requirement.