Home and Improvement

3/8ODF SERVICE VALVEThe 3/8ODF service valve prevents the loss of refrigerant in the event the condensing unit flood switch is activated and prevents the energizing of the high-pressure switch.The Ruud 61-104914-05 -Ruud 3/8ODF SERVICE VALVE a service...

Flowcheck Piston Kit W/ O-RingRHEEM Flowcheck Piston Kit W/ O-Ring - 61-25414-65" HVAC.Flow Check Kit For Ruud Gas, Propane Heat PumpsThe Flowcheck Piston kit w/ O-Ring provides an efficient way of monitoring refrigerant flow in a Rheem air conditioning...

Integrated Control BoardThe RHEEM 62-105217-01 integrated control board allows the homeowner to easily operate their home's heating and cooling system. It features 2 stage cooling, compatibility with 33 and 39 series split systems, single stage heating,...

Flame SensorThe Flame Sensor is a unique patented flame detection device, monitoring the burner flame during operation. It provides the thermostat with a differential sensing signal when flame is present or absent, enabling increased control accuracy,...

Flame SensorThe Flame Sensor easily installs in fuel gas return lines, and combines with the Remote Pilot Module to automatically shut off the gas supply if a flame is lost.The Flame Sensor by Rheem replaces the standard flame rod and is flared at the...

Direct Spark IgnitorThe Direct Spark Ignitor is a specially designed part that mounts directly to the burner head. It converts pilot burner flame thermal energy into electrical energy that allows the gas valve to open and start the main burner ignition...

Exhaust TransitionThe Exhaust Transition is designed to easily connect to the gas stub out on a Rheem condensing unit.Exhaust Transition~~~Exhaust Transition~~~The exhaust transition will help convert your 3" x 12" vent stack to connect to the 6" round...

Induced Draft Blower GasketInduced Draft Blower GasketThis Induced Draft Blower Gasket works with the following models and part numbers; 68-24016, 68-24017, 68-24019, 68-24021Rheem Induced Draft Blower Gasket is a genuine OEM Rheem replacement part. Use...

Induced Draft Motor w/GasketRheem 70-23641-04 -Ruud Induced Draft Motor w/GasketThe Induced Draft Thermostat/Motor has the ability to open and close the flue about 35 times per minute at 3-Temperature Fan switch positions. This helps to circulate air...

Blank Center Cap NameplateRuud Blank Center Cap NameplateRHEEM 91-101123-00 -Ruud Blank Center Cap Nameplate , Know what this is used for.A blank center cap nameplate may be just what your home needs. Measuring 22 inches in diameter, a center cap...

48 Motor Mounting KitAE-61698-82 Motor Mounting Kit - Shell ScrewRHEEM AE-61698-82 Motor Mounting Kit - Shell ScrewThe RHEEM AE-61698-82 Motor Mounting Kit - Shell Screw makes a great addition or replacement part for the following systems: RXAC AC...

Burner AssemblyRHEEM AM46970 Burner Assembly -Ruud. This burner assembly is a Ruud brand product.What This Product Does The Ruud Burner Assembly provides a convenient mounting for the ignition system. This product is compatible with the following...

Anode Rod 0.840"Diax24-3/8"lgThe RHEEM AP11525BH/2 Anode Rod 0.840"Diax24-3/8"lg RheemAnode Rod is a hard to find replacement part for the water heater model series listed below. This anode rod may also fit other models not listed below. These are the...

PILOT ASSEMBLY LPPilot Assembly LP input to output connections for the AP14318B-1 and AP13037 outdoor A/C products.Pilot assembly LP Rheem AP14318B-1. Mechanical governor for Rheem Models: RPB-20, RPB-24SSD, RFN-24SSD, RPB-22SD, RHB-36SD, and RSC-18SD...

THERMOSTAT SHANKThis THERMOSTAT SHANK is designed for Ruud heating and cooling equipment. It has a maximum of six wires that are compatible with the AP14696B -Ruud THERMOSTAT, the AP14907B -Ruud RELAY, as well as other relays. The wiring terminals have a...