Honeywell 101812 , Inc. Pressuretrol SPST 10-150 PSI make on rise no "B" terminal

MERCURY FREE PRESSURETROL 10-150 PSI CLOSE ON RISE

This Honeywell 101812 Pressuretrol 230 volt switch is an SPST 10-150 PSI Product Features type close on rise. UPC: 085435500248

The Honeywell product offered is the Pressuretrol SPST 10-150 PSI make on rise no "B" terminal in a round diaphragm style made by Honeywell.

The 10-150 PSI Pressuretrol pressure controller provides automatic protection against excessive oil, refrigerant, air, and water pressure in heating, ventilation, and air conditioning systems. Sensing is accomplished via a diaphragm that closes on rise at the lower end of its range and opens on fall at the upper end of its range. Feature a normally closed SPST (single pole single throw) electrical connection.

The Honeywell 101812 is a mercury-free pressure switch, SPST 10-150 psi make on rise no "B" terminal. It features a gas discharge lamp pilot, both one and three year limited warranty. The Honeywell 101812 Pressure Switch is ideal for applications such as gas furnaces, boilers, water heaters, salamanders, floor burners , ovens, and more.

The Honeywell 101812 Pressuretrol SPST 10-150 Pressure Switch comes with a white plastic cover. This Pressuretrol fits easily to the tank or cylinder valve are designed to be used with either natural gas or liquid propane (LP) systems, and can be used as a pressure regulator when installed in series with a gas appliance.

This controller's 10-150 PSI rise. It uses a pressuretrol type "A" or "B" switch and has an adjustable regulator to fine tune your output pressure. It's adjusted using a lever on the front of the power unit.

Place the Pressuretrol in-line with the fluid (gasoline, kerosene, diesel fuel) control line. The SPST pressure switch is automatic and should be used on small engine pressure control lines. It is designed for operation at 10-150 psi with handle positioned for normal On operation. For Off operation, the handle must be positioned to Off.