Honeywell 3317 , Inc. 5/8 in. OD x 1/2 in. Nominal Three-Way High Pressure Water Valve, 2.5 Cv.

PNEU VAL NO 3 WAY MIX 1/2 2-5 PSI 2.5CV

For use with almost any hydronic heating system, the Honeywell 3317 is a high pressure, low flow water valve for general thermostatic or manual control applications. The valve is designed for use on radiators in recirculation systems and can withstand pressures of 2000 PSI at 180°F. PNEU VAL no 3 WAY MIX 1/2 2-5 psig.

The following is a description of the benefit of the product but not the specific features: A 3/8" OD x 1/2" Nominal Three-Way High Pressure Water Valve, 2.5 CV with Pneumatic Pilot Connection, 21 to 40 PSI Operating Range, Max. Service Temp. 180 Degrees F, -22~176+19 deg C, Stainless Steel or Polypropylene Body Material. The product can be purchased from this website http://www.woodyshardware.net/#!catalog/category/308/_4073

Features: 2.5 Cv three-way valve provides separate mixing of hot, cold water and pressure relief (non-reversing) 3/4 in. Inlet and outlet ports provide connection to any supply and return lines using a combination of adapters (sold separately) Weather resistant for indoor or outdoor use; with UV stabilizers to help prevent color fading Can be installed in the horizontal or vertical position Tightening setscrew prevents tampering and accidental opening 0 to 200 PSIG maximum manifold pressure.

The Honeywell 3317 , Inc. 5/8 in. OD x 1/2 in. Nominal Three-Way High Pressure Water Valve, 2.5 Cv is a classically styled valve that is used with copper pipe systems and provides a 3 way mix with a 2.5 CSF pressure rating. The body of this product is made from die cast zinc for added durability, and the built in solenoid is sealed for added protection against moisture and hazardous material such as acids or caustics, enabling its use in hazardous locations.

3/8" Nominal Three-Way High Pressure Water Valve, 2.5 Cv

The Honeywell 1/2 NPS, pre-plumed 5/8 in. OD x 1/2 in. Nominal Three-Way High Pressure Water Valve is approved for potable and non-potable use with a certified pressure range of 2.5-5 psi (17 bar). This valve features corrosion resistant all brass body, plunger and stem, diaphragm and seal assembly along with a UV resistant black hood.

High pressure three way valve is a pneumatic/electro-hydraulic part that provides a method to route the flow of air and water or water and water for hydraulics applications. The main function of this part is to regulate the amount of air, water and water in three way applications. There are three ports on the valve that include no flow port, air port, and water port.