Honeywell 3317 , Inc. 5/8 in. OD x 1/2 in. Nominal Three-Way High Pressure Water Valve, 2.5 Cv

PNEU VAL NO 3 WAY MIX 1/2 2-5 PSI 2.5CV

This three-way mixing valve permits two independent accessory devices to operate in conjunction with a standard water faucet. The 2.5 CV provides up to 2.5 CV of water flow at a maximum pressure of 5 PSI and a minimum pressure of 2 PSI. The valve admits zero to 1/2 CV of water flow when the faucet is full on (0 PSI) or closed off (15 PSI). Zero to 1/2 CV of water flow is also provided when the faucet is fully open (0 PSI) or partially closed (2.5 PSI).

This Pneumatic 2-5 psi Three Way High Pressure Water Valve can be used for sprinkler systems, fire fighting and automotive air conditioners. It is made of malleable iron with brass valve and bonnet. The specific gravity of this Honeywell 3317 pneumatic Three Way High Pressure Water Valve is 4.9.

This 5/8 in. npt 3-way valve is used to connect a high pressure sprinkler system with a low pressure drip irrigation piping system. The pressure regulator maintains the desired 2.5 psi operating pressure within the interconnect piping and 3 way valves, resulting in a consistent 3.0 psi application rate from the sprinkler head, regardless of fluctuations in line water pressures.

This three-way manifold allows 2.5 cubic feet per minute (cfm) of directional control for a variety of applications. It is used to connect a straight supply and return line to their respective fixtures or device, all of which are compatible with water at 2.5 psi (17.25 kPa) maximum pressure. This manifold features a threaded neck connection, male NPT thread, 3/4-inch inlet and 1/2-inch outlets for connection to related hoses, and a 3/8-inch female NPT inlet that connects to the water supply regulator.

This is a 2.5 liter / CMH Pressure Regulator, rated at 2-5 PSI, made of brass (nickel-plated), with an 1/8 in. pipe port and 3/8 in. male NPT inlet and outlet fittings. The pressure regulator has internal o-ring that seals the flow path as well as two external shutoff valve seats that are operated by the valve handle to regulate the output pressure.

The 3-way Mixing Valve is primarily used to mix hot and cold water in commercial refrigeration. The valve is designed for use in heat pump systems.

This high-pressure, neoprene-lined three-way water valve features a white polypropylene handle for ease of operation and durability. It is used with standard sprinklers or drip lines. The Cv rating indicates its flow capacity when fully open.