HONEYWELL 340515 DIAMOND Spring return actuator , 27lb.inch, LOW VO VOLT, 2-10V MOD ONLY, Feedback, No

DIAMOND Spring return actuator , 27lb.inch, LOW VO VOLT, 2-10V MOD ONLY, Feedback, No

#DIAMOND Spring return actuator , 27lb.inch, LOW VO VOLT, 2-10V MOD ONLY, Feedback, No

Honeywell 340515 DIAMOND Spring return actuator , 27lb.inch, LOW VO VOLT, 2-10V MOD ONLY, Feedback, No #340515 is a part of the DIAMOND mechanical actuator series. It's a spring return actuator which has N/o Normally Open and N/c Normally Closed terminals/sockets for connection to servo valve or other control devices. The maximum power handling capacity of this Honeywell 340515 DIAMOND Spring return actuator, 27lb.inch, LOW VO VOLT, 2-10V MOD ONLY, Feedback,

Based on the industry standard and preferred return actuator, the DIAMOND™ model, 25TXH (27lb. inch; low voltage), 2-10V MOD ONLY Feedback, NO by Honeywell, provides a 2 or 10 VDC proportional output signal as a function of spring displacement. This is accomplished by a plunger cartridge that is actuated by a conventional extended stroke return spring to accurately locate the actuator in a home position.

The DIAMOND&trade is a spring return actuator that can be used for numerous applications throughout the home. Featuring an air spring to assure consistent, reliable and uniforming movement, this actuator is 74mm long and a diameter of 50mm. This is a low voltage version that requires a 2-10V DC power supply to operate.  

Our DIAMOND spring return actuator will help you modulate the potentiometer. You can change the range on your device with a simple flick of the wrist. This spring-loaded mechanism replaces the knob and shaft, making it easier to actuate potentiometers, DC motors, valves, thermoplastic elastomers (TPE) and other rotary position measurement controls.

Honeywell's 340515 DIAMOND Spring return actuator is designed to be used with channel mount levers. This honeywell 340515 is made to work with a right hand actuator, mounted on the lock side of the door. Honeywell Actuators are made for use in standard doors with 2-3/8 in. or 2-3/4 in. stiles and Multi-Point Locking Systems. Advanced engineering and quality construction make Honeywell Actuators reliable and long-lasting.

No-load current less than 10mA, Very high return force (27lb.inch), Normally closed (N/C) and Normally open (N/O) coil terminations.